EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Vortex Structure and Aerodynamic Loads of a Pentagonal Heliostat for Concentrating Solar Power: A CFD Study

Erhan Huang, Ying Chang, Yangzhao Liu, Kaoshan Dai, Peng Chen

Fluids · 17.02.2026 · 11 (2) · 54

DOI: 10.3390/fluids11020054 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Fluids, online erschienen am 17.02.2026. Verfasst von Erhan Huang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Sichuan.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Heliostats constitute essential elements within concentrating solar power (CSP), where their structure, load profiles, and operational environment render wind loads a critical factor in their design considerations, as these loads directly impact the cost of energy generation. The aerodynamics significantly influence wind-induced effects, resulting in considerable variability in wind loads among different heliostat geometries. This study utilizes the Computational Fluid Dynamics (CFD) methodology to systematically examine the aerodynamic behavior of an isolated pentagonal heliostat. Employing the Unsteady Reynolds-Averaged Navier–Stokes (URANS) equations with an atmospheric boundary layer inlet condition, the investigation focuses on the flow field and wind load characteristics at four representative pitch angles: 0° (stow position), 30°, 60°, and 90°. Findings indicate that the pitch angle exerts a decisive impact on flow separation patterns. Specifically, as the elevation angle decreases, the flow regime shifts from being predominantly influenced by the mirror surface to being governed by the support structure, mediated through an interactive coupling between these components. At the 60° operational pitch angle, the pentagonal heliostat’s distinctive corner geometry induces an asymmetric vortex configuration—characterized by a smaller vortex at the top and a larger one at the bottom—thereby disrupting the conventional vortex distribution observed in symmetric heliostat designs. A further analysis of wind load characteristics indicates that, compared to a quadrilateral heliostat, the pentagonal mirror exhibits a significantly lower Elevation Moment Coefficient, despite a slight increase in the normal force coefficient. This reduction is attributed to a balancing mechanism: the “vortex structure asymmetry” creates an upper-large–lower-small distribution of absolute negative pressure on the support surface, while the “stagnation point position” shift with elevation angle produces an upper-small–lower-large distribution of absolute positive pressure on the reflector. The interaction between these opposing trends minimizes the net pressure differential across the mirror height, thereby contributing to superior overall aerodynamic performance. The reduction in the elevation moment coefficient contributes to enhanced structural wind resistance, thereby improving the overall energy efficiency and economic viability of concentrating solar power.

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Sichuan

Zitieren

APA

Huang, E., Chang, Y., Liu, Y., Dai, K., & Chen, P. (2026). Vortex Structure and Aerodynamic Loads of a Pentagonal Heliostat for Concentrating Solar Power: A CFD Study. Fluids, 11(2), 54. https://doi.org/10.3390/fluids11020054

Vancouver

Huang E, Chang Y, Liu Y, Dai K, Chen P. Vortex Structure and Aerodynamic Loads of a Pentagonal Heliostat for Concentrating Solar Power: A CFD Study. Fluids. 2026;11(2):54. doi:10.3390/fluids11020054

BibTeX
@article{Huang2026,
  author = {Huang, Erhan and Chang, Ying and Liu, Yangzhao and Dai, Kaoshan and Chen, Peng},
  title = {Vortex Structure and Aerodynamic Loads of a Pentagonal Heliostat for Concentrating Solar Power: A CFD Study},
  journal = {Fluids},
  year = {2026},
  volume = {11},
  number = {2},
  pages = {54},
  doi = {10.3390/fluids11020054}
}
Kostenlos starten →