EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhancing Thermal Comfort in Buildings: A Computational Fluid Dynamics Study of Multi-Layer Encapsulated Phase Change Materials–Integrated Bricks for Energy Management

Farzad Ghafoorian, Mehdi Mehrpooya, Seyed Reza Mirmotahari, Mahmood Shafiee

Fluids · 10.07.2025 · 10 (7) · 181

DOI: 10.3390/fluids10070181 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Fluids, online erschienen am 10.07.2025. Verfasst von Farzad Ghafoorian und 3 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Thermal energy storage plays a vital role in enhancing the efficiency of energy systems, particularly in building applications. Phase change materials (PCMs) have gained significant attention as a passive solution for energy management within building envelopes. This study examines the thermal performance of encapsulated PCMs integrated into bricks as a passive cooling method, taking into account the outdoor climate conditions to enhance indoor thermal comfort throughout summer and winter seasons. A computational fluid dynamics (CFDs) analysis is performed to compare three configurations: a conventional brick, a brick with a single PCM layer, and a brick with three PCM layers. Results indicate that the three-layer PCM configuration provides the most effective thermal regulation, reducing peak indoor temperature fluctuations by up to 4 °C in summer and stabilizing indoor temperature during winter. Also, the second and third PCM layers exhibit minimal latent heat absorption, with their liquid fractions indicating that melting does not occur. As a result, these layers primarily serve as thermal insulation—limiting heat ingress in summer and reducing heat loss in winter. During summer, the absence of the first PCM layer in the single-layer configuration leads to faster thermal penetration, causing the brick to reach peak temperatures approximately two hours earlier in the afternoon and increasing the temperature by about 5 °C.

Zitieren

APA

Ghafoorian, F., Mehrpooya, M., Mirmotahari, S. R., & Shafiee, M. (2025). Enhancing Thermal Comfort in Buildings: A Computational Fluid Dynamics Study of Multi-Layer Encapsulated Phase Change Materials–Integrated Bricks for Energy Management. Fluids, 10(7), 181. https://doi.org/10.3390/fluids10070181

Vancouver

Ghafoorian F, Mehrpooya M, Mirmotahari SR, Shafiee M. Enhancing Thermal Comfort in Buildings: A Computational Fluid Dynamics Study of Multi-Layer Encapsulated Phase Change Materials–Integrated Bricks for Energy Management. Fluids. 2025;10(7):181. doi:10.3390/fluids10070181

BibTeX
@article{Ghafoorian2025,
  author = {Ghafoorian, Farzad and Mehrpooya, Mehdi and Mirmotahari, Seyed Reza and Shafiee, Mahmood},
  title = {Enhancing Thermal Comfort in Buildings: A Computational Fluid Dynamics Study of Multi-Layer Encapsulated Phase Change Materials–Integrated Bricks for Energy Management},
  journal = {Fluids},
  year = {2025},
  volume = {10},
  number = {7},
  pages = {181},
  doi = {10.3390/fluids10070181}
}
Kostenlos starten →