EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Preparation and Performance Study of Organic–Inorganic Nanocomposite Intumescent Fire-Retardant Coatings

Youhao Xie, Wenjie Wei, Liangyuan Qi, Weiyi Xing, Yuan Hu

Fire · 21.07.2026 · 9 (7) · 312

DOI: 10.3390/fire9070312 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Fire, online erschienen am 21.07.2026. Verfasst von Youhao Xie und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Research and Development Program of Anhui Province, National Natural Science Foundation of China, Education Department Fund of Anhui Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The issue of thermal runaway in power batteries of new-energy vehicles occurs frequently, posing a serious threat to life and property safety. This study aims to develop a high-performance fire-proof coating to address this problem. Specifically, the research focused on constructing an organic-inorganic composite intumescent fire-resistant coating, with modified halloysites (Ti-HNTs) serving as the key component. In this coating system, the intumescent flame-retardant (IFR) system and Ti-HNTs were employed as the organic and inorganic components, respectively, while water-based epoxy resin emulsion was selected as the matrix material. Through the utilization of XPS, FTIR, and SEM techniques, it was verified that the Ti-HNTs were successfully modified and integrated well with the coating matrix. Following further optimization of the Ti-HNTs proportion and coating thickness, it was determined that the coating containing 4% Ti-HNTs with a designed thickness of 1.5 mm exhibited the optimal fire-proofing performance. In the fire-resistance experiment, after 10 min of testing, the temperature of this coating could reach a minimum of 215.9 °C. Compared to the control group, its heat-insulation effect was enhanced by 49.4%, with an expansion multiplier of 37.7 and a maximum smoke density of 22.55. These results were significantly superior to those of the control group without the addition of Ti-HNTs. SEM analysis indicated that the coating could form a uniform and dense carbon layer, with an inner surface featuring a honeycomb-bubble structure. This SEM-analyzed Ti-HNTs-modified fire-proof coating demonstrated excellent fire resistance and thermal-isolation effects in new-energy vehicle batteries, thus providing reliable fire protection for the batteries. Additionally, impact-resistance tests revealed that the coating could withstand a simulated battery pressure-relief impact without penetration, maintaining its structural integrity and thermal-barrier function. This further validated its reliability for battery fire protection.

Förderung

  • Key Research and Development Program of Anhui Province
  • National Natural Science Foundation of China
  • Education Department Fund of Anhui Province

Zitieren

APA

Xie, Y., Wei, W., Qi, L., Xing, W., & Hu, Y. (2026). The Preparation and Performance Study of Organic–Inorganic Nanocomposite Intumescent Fire-Retardant Coatings. Fire, 9(7), 312. https://doi.org/10.3390/fire9070312

Vancouver

Xie Y, Wei W, Qi L, Xing W, Hu Y. The Preparation and Performance Study of Organic–Inorganic Nanocomposite Intumescent Fire-Retardant Coatings. Fire. 2026;9(7):312. doi:10.3390/fire9070312

BibTeX
@article{Xie2026,
  author = {Xie, Youhao and Wei, Wenjie and Qi, Liangyuan and Xing, Weiyi and Hu, Yuan},
  title = {The Preparation and Performance Study of Organic–Inorganic Nanocomposite Intumescent Fire-Retardant Coatings},
  journal = {Fire},
  year = {2026},
  volume = {9},
  number = {7},
  pages = {312},
  doi = {10.3390/fire9070312}
}
Kostenlos starten →