EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Application of LiDAR Derived Fuel Cells to Wildfire Modeling at Laboratory Scale

Anthony A. Marcozzi, Jesse V. Johnson, Russell A. Parsons, Sarah J. Flanary, Carl A. Seielstad, Jacob Z. Downs

Fire · 13.10.2023 · 6 (10) · 394

DOI: 10.3390/fire6100394 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Fire, online erschienen am 13.10.2023. Verfasst von Anthony A. Marcozzi und 5 weiteren Autor:innen. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Strategic Environmental Research and Development Program (SERDP), National Science Foundation EPSCoR.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Terrestrial LiDAR scans (TLS) offer a rich data source for high-fidelity vegetation characterization, addressing the limitations of traditional fuel sampling methods by capturing spatially explicit distributions that have a significant impact on fire behavior. However, large volumes of complex, high resolution data are difficult to use directly in wildland fire models. In this study, we introduce a novel method that employs a voxelization technique to convert high-resolution TLS data into fine-grained reference voxels, which are subsequently aggregated into lower-fidelity fuel cells for integration into physics-based fire models. This methodology aims to transform the complexity of TLS data into a format amenable for integration into wildland fire models, while retaining essential information about the spatial distribution of vegetation. We evaluate our approach by comparing a range of aggregate geometries in simulated burns to laboratory measurements. The results show insensitivity to fuel cell geometry at fine resolutions (2–8 cm), but we observe deviations in model behavior at the coarsest resolutions considered (16 cm). Our findings highlight the importance of capturing the fine scale spatial continuity present in heterogeneous tree canopies in order to accurately simulate fire behavior in coupled fire-atmosphere models. To the best of our knowledge, this is the first study to examine the use of TLS data to inform fuel inputs to a physics based model at a laboratory scale.

Förderung

  • Strategic Environmental Research and Development Program (SERDP)
  • National Science Foundation EPSCoR

Zitieren

APA

Marcozzi, A. A., Johnson, J. V., Parsons, R. A., Flanary, S. J., Seielstad, C. A., & Downs, J. Z. (2023). Application of LiDAR Derived Fuel Cells to Wildfire Modeling at Laboratory Scale. Fire, 6(10), 394. https://doi.org/10.3390/fire6100394

Vancouver

Marcozzi AA, Johnson JV, Parsons RA, Flanary SJ, Seielstad CA, Downs JZ. Application of LiDAR Derived Fuel Cells to Wildfire Modeling at Laboratory Scale. Fire. 2023;6(10):394. doi:10.3390/fire6100394

BibTeX
@article{Marcozzi2023,
  author = {Marcozzi, Anthony A. and Johnson, Jesse V. and Parsons, Russell A. and Flanary, Sarah J. and Seielstad, Carl A. and Downs, Jacob Z.},
  title = {Application of LiDAR Derived Fuel Cells to Wildfire Modeling at Laboratory Scale},
  journal = {Fire},
  year = {2023},
  volume = {6},
  number = {10},
  pages = {394},
  doi = {10.3390/fire6100394}
}
Kostenlos starten →