EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Waste-Derived Oil Palm Mesocarp Fiber in LLDPE Biocomposites: Low-Loading Mechanical and Moisture Response

Muhammad Irfan Nuryanta, Rahmat Doni Widodo, Ahmad Mujaki, Hendrix Noviyanto Firmansyah, Rizky Ajie Aprilianto, Betti Ses Eka Polonia, Edi Purnomo, Urip Agus Salim, Gesang Nugroho, Muhammad Akhsin Muflikhun

Fibers · 13.11.2026 · 14 (11) · 134

DOI: 10.3390/fib14110134 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Fibers, online erschienen am 13.11.2026. Verfasst von Muhammad Irfan Nuryanta und 9 weiteren Autor:innen. Die Arbeit nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universitas Negeri Semarang.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Waste-derived oil palm mesocarp fiber (OPMF) has potential as a lignocellulosic reinforcement for thermoplastic composites. The same trend in strength, stiffness, and moisture-related properties does not always hold at relatively low fiber loadings. This study examined these property changes in linear low-density polyethylene (LLDPE) biocomposites. Composites containing 0, 5, 10, and 15 wt% alkali-treated OPMF were produced by hot compression molding. Tensile and flexural properties, density, 24 h water absorption, and water contact angle were evaluated, supported by scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), and differential scanning calorimetry (DSC). The 5 wt% composite showed the highest mean tensile and flexural strengths of 16.16 ± 1.14 MPa and 29.33 ± 3.57 MPa, while the highest apparent tensile modulus (521.25 ± 38.84 MPa) and flexural modulus (0.888 ± 0.122 GPa) occurred at 10 wt%. Water absorption increased from 0.06 ± 0.01% to 1.19 ± 0.12%, while the contact angle decreased from 97.78 ± 2.04° to 65.18 ± 5.21°. Strength, stiffness, and moisture response followed different loading-dependent trends, indicating a composition-dependent strength–stiffness–moisture trade-off within the investigated range.

Förderung

  • Universitas Negeri Semarang

Zitieren

APA

Nuryanta, M. I., Widodo, R. D., Mujaki, A., Firmansyah, H. N., Aprilianto, R. A., Polonia, B. S. E., Purnomo, E., Salim, U. A., Nugroho, G., & Muflikhun, M. A. (2026). Waste-Derived Oil Palm Mesocarp Fiber in LLDPE Biocomposites: Low-Loading Mechanical and Moisture Response. Fibers, 14(11), 134. https://doi.org/10.3390/fib14110134

Vancouver

Nuryanta MI, Widodo RD, Mujaki A, Firmansyah HN, Aprilianto RA, Polonia BSE, et al. Waste-Derived Oil Palm Mesocarp Fiber in LLDPE Biocomposites: Low-Loading Mechanical and Moisture Response. Fibers. 2026;14(11):134. doi:10.3390/fib14110134

BibTeX
@article{Nuryanta2026,
  author = {Nuryanta, Muhammad Irfan and Widodo, Rahmat Doni and Mujaki, Ahmad and Firmansyah, Hendrix Noviyanto and Aprilianto, Rizky Ajie and Polonia, Betti Ses Eka and Purnomo, Edi and Salim, Urip Agus and Nugroho, Gesang and Muflikhun, Muhammad Akhsin},
  title = {Waste-Derived Oil Palm Mesocarp Fiber in LLDPE Biocomposites: Low-Loading Mechanical and Moisture Response},
  journal = {Fibers},
  year = {2026},
  volume = {14},
  number = {11},
  pages = {134},
  doi = {10.3390/fib14110134}
}
Kostenlos starten →