EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Heat-Resistant Polyimide Nanofibrous Moisture Diode for Thermal-Insulating Protective Interlayers

Longfei Zhang, Anqi Liu, Shuo Dong, Jiaqi Sun, Dongxiao Ji

Fibers · 29.10.2026 · 14 (11) · 126

DOI: 10.3390/fib14110126 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Fibers, online erschienen am 29.10.2026. Verfasst von Longfei Zhang und 4 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Thermal-protective textile interlayers must block external heat without trapping perspiration next to the skin. This requirement is difficult to meet because low-thermal-conductivity structures favor heat shielding, whereas wettable and open fibrous networks are needed for rapid moisture release. Here we show a heat-resistant polyimide nanofibrous moisture diode that couples thermal insulation with directional liquid transport. The membrane is built from a hydrophobic ytterbium oxide/polyimide nanofiber membrane (Yb2O3/PI NFM) heat-shielding layer and a hydrophilic lithium chloride /polyimide nanofiber membrane (LiCl/PI NFM) capillary layer. The low thermal conductivity of the Yb2O3/PI layer limits through-thickness heat transfer, while the hydrophilic LiCl/PI layer, with its bimodal nano/submicron fibrous morphology, draws and spreads water after it crosses the hydrophobic side. This asymmetric wettability and pore architecture rectifies liquid transport from the hydrophobic Yb2O3/PI side toward the hydrophilic LiCl/PI side. The PI(2:2) bilayer, prepared using equal precursor-solution volumes, shows a 54 °C temperature difference on a 200 °C hot stage, a water-vapor transmission rate of 7854 g m−2 d−1 and a one-way transport index of 957.43% from a moisture-management test, indicating preferential liquid transport from the hydrophobic side toward the hydrophilic side, with flame cessation observed after separation from the ignition flame during a qualitative flame-exposure test. These findings support further exploration of PI nanofibrous membranes for thermal and moisture management in protective textile interlayers.

Zitieren

APA

Zhang, L., Liu, A., Dong, S., Sun, J., & Ji, D. (2026). A Heat-Resistant Polyimide Nanofibrous Moisture Diode for Thermal-Insulating Protective Interlayers. Fibers, 14(11), 126. https://doi.org/10.3390/fib14110126

Vancouver

Zhang L, Liu A, Dong S, Sun J, Ji D. A Heat-Resistant Polyimide Nanofibrous Moisture Diode for Thermal-Insulating Protective Interlayers. Fibers. 2026;14(11):126. doi:10.3390/fib14110126

BibTeX
@article{Zhang2026,
  author = {Zhang, Longfei and Liu, Anqi and Dong, Shuo and Sun, Jiaqi and Ji, Dongxiao},
  title = {A Heat-Resistant Polyimide Nanofibrous Moisture Diode for Thermal-Insulating Protective Interlayers},
  journal = {Fibers},
  year = {2026},
  volume = {14},
  number = {11},
  pages = {126},
  doi = {10.3390/fib14110126}
}
Kostenlos starten →