Drying Process Development for Lignocellulosic Water Hyacinth Fibers: Design and Performance Evaluation of an Innovative Dryer Machine for Small-Scale Craft Industry
Fibers · 17.07.2026 · 14 (7) · 86
DOI: 10.3390/fib14070086 ↗Kurz gefasst
Fachartikel in der Zeitschrift Fibers, online erschienen am 17.07.2026. Verfasst von Khakam Ma’ruf und 7 weiteren Autor:innen. Die Arbeit nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Indonesia Endowment Fund for Education, Ministry of Finance of the Republic of Indonesia.
Abstract (Originalsprache)
Water hyacinth (Eichhornia crassipes) is an invasive aquatic plant with high lignocellulosic content, offering potential as a natural fiber resource for craft-based industries. However, its extremely high initial moisture content (≈95%) presents a major challenge in fiber processing, particularly for small-scale industries that rely on traditional sun-drying methods. These methods are highly dependent on weather conditions, prone to contamination, and produce inconsistent fiber quality. This study adopts a research and development (R&D) approach to design and evaluate an innovative dryer machine specifically for water hyacinth fiber processing. The proposed system utilizes LPG-based heating and controlled airflow to achieve stable drying conditions. Experimental results show that the dryer machine can process 10 kg of wet water hyacinth within 280 min, significantly shorter than the approximately four days required for manual drying. The system reduces the moisture content to below 10%, resulting in improved fiber cleanliness, uniformity, and usability. Although the dried mass produced by the machine is slightly lower compared to manual drying, this is attributed to more effective moisture removal, leading to lower residual water content in the final product. Productivity analysis indicates improved operational consistency and higher processing capacity over extended periods (30–180 days), particularly under varying weather conditions. These findings demonstrate that controlled drying technology provides a reliable and efficient solution for lignocellulosic fiber processing in small-scale industries, contributing to improved material utilization and sustainable biomass management.
Förderung
- Indonesia Endowment Fund for Education
- Ministry of Finance of the Republic of Indonesia
Zitieren
APA
Ma’ruf, K., Setiawan, R. J., Akbar, T., Putri, R. K. R., Aditya, Z. A., Sutopo, A., Yogi, M., & Chen, Y. (2026). Drying Process Development for Lignocellulosic Water Hyacinth Fibers: Design and Performance Evaluation of an Innovative Dryer Machine for Small-Scale Craft Industry. Fibers, 14(7), 86. https://doi.org/10.3390/fib14070086
Vancouver
Ma’ruf K, Setiawan RJ, Akbar T, Putri RKR, Aditya ZA, Sutopo A, et al. Drying Process Development for Lignocellulosic Water Hyacinth Fibers: Design and Performance Evaluation of an Innovative Dryer Machine for Small-Scale Craft Industry. Fibers. 2026;14(7):86. doi:10.3390/fib14070086
BibTeX
@article{Maruf2026,
author = {Ma’ruf, Khakam and Setiawan, Rizal Justian and Akbar, Taufik and Putri, Rheina Khaisa Rhehani and Aditya, Zaky Ahmad and Sutopo, Afan and Yogi, Muhamad and Chen, Yu-Tzu},
title = {Drying Process Development for Lignocellulosic Water Hyacinth Fibers: Design and Performance Evaluation of an Innovative Dryer Machine for Small-Scale Craft Industry},
journal = {Fibers},
year = {2026},
volume = {14},
number = {7},
pages = {86},
doi = {10.3390/fib14070086}
}
EUVIMED