EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Research Progress on Advanced Molding Technologies for Carbon Fiber-Reinforced Polymer Composites: Defect Control and Process Optimization

Qun Li, Xufeng Song, Longzhan Zheng, Guangxi Li, Qingqing Lü, Liquan Yang, Erbo Liu, Yuqin Ma, Zhoukui Li

Fibers · 08.06.2026 · 14 (6) · 69

DOI: 10.3390/fib14060069 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Fibers, online erschienen am 08.06.2026. Verfasst von Qun Li und 8 weiteren Autor:innen. Die Arbeit nennt 198 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Henan Science and Technology R&D Program Joint Fund, Henan Key Research and Development and Promotion Special Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Carbon fiber-reinforced polymer (CFRP) composites are in urgent demand in the aerospace, new energy vehicle, and wind power sectors owing to their superior specific strength, specific modulus, and lightweight potential. However, molding defects, such as voids, dry spots, and delamination, arising from their anisotropy and weak interlaminar bonding, severely constrain their service performance. Advanced molding technologies represent the key to overcoming this bottleneck. This paper systematically reviews typical advanced molding technologies in the field of CFRP composites, including resin transfer molding (RTM) and vacuum-assisted resin transfer molding (VARTM) in liquid composite molding, autoclave molding and compression molding (CM) in prepreg molding, and automated fiber placement (AFP) and material extrusion (ME) in automated molding. From an integrated perspective of “technological evolution–process characteristics–defect mechanisms–optimization strategies,” this review summarizes the technical principles, development trajectories, and core advantages of each process, analyzes the formation mechanisms of typical defects, including voids, dry spots, delamination, wrinkles, warpage, and melt instability, and summarizes multidimensional optimization advances in process parameter regulation, numerical simulation, resin modification, equipment upgrading, path planning, and thermal management. Furthermore, the differences and complementarities among these processes in terms of molding precision, efficiency, cost, and applicable scope are compared. Finally, future development directions, including digital twins, green low-carbon manufacturing, ultra-large integrated structures, multi-process integration, standardized defect characterization, and low-cost collaborative design, are discussed. This paper aims to provide systematic theoretical references and technical support for the optimization and upgrading, process integration, and industrial application of advanced CFRP molding technologies.

Förderung

  • Henan Science and Technology R&D Program Joint Fund
  • Henan Key Research and Development and Promotion Special Project

Zitieren

APA

Li, Q., Song, X., Zheng, L., Li, G., Lü, Q., Yang, L., Liu, E., Ma, Y., & Li, Z. (2026). Research Progress on Advanced Molding Technologies for Carbon Fiber-Reinforced Polymer Composites: Defect Control and Process Optimization. Fibers, 14(6), 69. https://doi.org/10.3390/fib14060069

Vancouver

Li Q, Song X, Zheng L, Li G, Lü Q, Yang L, et al. Research Progress on Advanced Molding Technologies for Carbon Fiber-Reinforced Polymer Composites: Defect Control and Process Optimization. Fibers. 2026;14(6):69. doi:10.3390/fib14060069

BibTeX
@article{Li2026,
  author = {Li, Qun and Song, Xufeng and Zheng, Longzhan and Li, Guangxi and Lü, Qingqing and Yang, Liquan and Liu, Erbo and Ma, Yuqin and Li, Zhoukui},
  title = {Research Progress on Advanced Molding Technologies for Carbon Fiber-Reinforced Polymer Composites: Defect Control and Process Optimization},
  journal = {Fibers},
  year = {2026},
  volume = {14},
  number = {6},
  pages = {69},
  doi = {10.3390/fib14060069}
}
Kostenlos starten →