EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Torrefied Woody Biomass Produced at Different Temperatures: Material Properties and Short-Term Effects on Soil Solution Chemistry and Water Retention

Kateřina Hájková, Tomáš Holeček, Ivana Tomášková, Karolina Resnerová, Jan Macků

Forests · 16.11.2026 · 17 (11) · 1369

DOI: 10.3390/f17111369 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Forests, online erschienen am 16.11.2026. Verfasst von Kateřina Hájková und 4 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Czech University of Life Sciences Prague.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Torrefaction offers a potential route for converting woody residues into soil amendments, but greater carbon enrichment does not necessarily translate into greater carbon recovery or improved soil water retention. This study compared mixed woody biomass torrefied at 220, 250, and 280 °C in a furnace pre-flushed with argon with untreated biomass and commercial wood-derived biochar. Each torrefaction temperature was represented by one production batch, and commercial biochar served as an external benchmark. Material characterization was combined with a 14-day incubation in an acidic Cambisol and separate laboratory measurements of water retention and drying. Amendments were applied at 2% of dry soil mass, resulting in unequal carbon inputs. Across the batches produced at increasing temperatures, solid yield decreased from 86.47% to 57.03%, and carbon content increased from 47.33% in untreated biomass to 62.10% in biomass torrefied at 280 °C. However, recovery of the original feedstock carbon in the solid product decreased from 93.1% at 220 °C to 74.8% at 280 °C. Declining atomic hydrogen-to-carbon and oxygen-to-carbon ratios indicated increasing carbonization, with commercial biochar showing the lowest ratios. Between days 7 and 14, the amounts of organic carbon recovered in sampled soil solution decreased significantly in all treatments, whereas nitrogen and phosphorus responses varied among treatments. No significant temporal changes in pH or potassium were detected after adjustment for multiple comparisons. Following saturation and 30 min of free drainage, gravimetric water contents ranged from 0.53 to 0.57 g·g−1 in soils receiving amendments, compared with 0.43 g·g−1 in unamended soil. All amended soils had numerically higher initial water contents than the control, but drying curves did not identify a consistently superior treatment. For these batches, greater carbonization was accompanied by lower carbon recovery without a consistent improvement in water retention. Screening torrefaction conditions for potential soil applications should therefore consider carbon recovery alongside material composition and measured soil responses. These short-term findings do not establish an optimal production temperature, long-term carbon persistence, or agronomic benefits.

Förderung

  • Czech University of Life Sciences Prague

Zitieren

APA

Hájková, K., Holeček, T., Tomášková, I., Resnerová, K., & Macků, J. (2026). Torrefied Woody Biomass Produced at Different Temperatures: Material Properties and Short-Term Effects on Soil Solution Chemistry and Water Retention. Forests, 17(11), 1369. https://doi.org/10.3390/f17111369

Vancouver

Hájková K, Holeček T, Tomášková I, Resnerová K, Macků J. Torrefied Woody Biomass Produced at Different Temperatures: Material Properties and Short-Term Effects on Soil Solution Chemistry and Water Retention. Forests. 2026;17(11):1369. doi:10.3390/f17111369

BibTeX
@article{Hjkov2026,
  author = {Hájková, Kateřina and Holeček, Tomáš and Tomášková, Ivana and Resnerová, Karolina and Macků, Jan},
  title = {Torrefied Woody Biomass Produced at Different Temperatures: Material Properties and Short-Term Effects on Soil Solution Chemistry and Water Retention},
  journal = {Forests},
  year = {2026},
  volume = {17},
  number = {11},
  pages = {1369},
  doi = {10.3390/f17111369}
}
Kostenlos starten →