Screw Withdrawal Performance of Hybrid Cross-Laminated Timber (CLT) Manufactured from Spruce (Picea abies), Beech (Fagus sylvatica) and Hungarian Poplar (Populus spp.)
Forests · 13.05.2026 · 17 (5) · 590
DOI: 10.3390/f17050590 ↗Kurz gefasst
Fachartikel in der Zeitschrift Forests, online erschienen am 13.05.2026. Verfasst von József Garab und 3 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Culture and Innovation of Hungary from the National Research, Development and Innovation Fund.
Abstract (Originalsprache)
Screw withdrawal force is a key mechanical property related to the load-bearing capacity and reliability of mechanically fastened timber structures. This study investigates the screw withdrawal performance of cross-laminated timber (CLT) manufactured from spruce, beech, and poplar, including both homogeneous and hybrid layups. The selected species represent materials with different densities and regional availability in Hungary. A one-component polyurethane adhesive was used for panel manufacturing. Screw withdrawal force was determined using two methods: a universal testing machine (UTM) and a manual portable device (MPD). The highest withdrawal forces were observed in beech-based configurations, while the lowest values were measured for spruce. Poplar-based configurations demonstrated intermediate but competitive performance, exceeding the reference spruce values. Statistical evaluation confirmed a significant effect of layup configuration on withdrawal resistance. The MPD measurements were on average approximately 9% higher than UTM results, indicating a consistent and quantifiable inter-method difference. The results demonstrate that hybrid CLT configurations can be optimized by combining species of different densities and that portable testing methods provide reliable estimates of withdrawal performance. These findings contribute to the understanding of connection behavior in hybrid CLT and support the practical application of semi-destructive testing methods for in-situ assessment.
Förderung
- Ministry of Culture and Innovation of Hungary from the National Research, Development and Innovation Fund
Zitieren
APA
Garab, J., Tóth, Z. G., Ahmed, A. A. O., & Bejó, L. (2026). Screw Withdrawal Performance of Hybrid Cross-Laminated Timber (CLT) Manufactured from Spruce (Picea abies), Beech (Fagus sylvatica) and Hungarian Poplar (Populus spp.). Forests, 17(5), 590. https://doi.org/10.3390/f17050590
Vancouver
Garab J, Tóth ZG, Ahmed AAO, Bejó L. Screw Withdrawal Performance of Hybrid Cross-Laminated Timber (CLT) Manufactured from Spruce (Picea abies), Beech (Fagus sylvatica) and Hungarian Poplar (Populus spp.). Forests. 2026;17(5):590. doi:10.3390/f17050590
BibTeX
@article{Garab2026,
author = {Garab, József and Tóth, Zsolt György and Ahmed, Ahmed Altaher Omer and Bejó, László},
title = {Screw Withdrawal Performance of Hybrid Cross-Laminated Timber (CLT) Manufactured from Spruce (Picea abies), Beech (Fagus sylvatica) and Hungarian Poplar (Populus spp.)},
journal = {Forests},
year = {2026},
volume = {17},
number = {5},
pages = {590},
doi = {10.3390/f17050590}
}
EUVIMED