EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimizing UAV-LiDAR Point Density for Eucalyptus Height Estimation in Agroforestry

Ernandes Macedo da Cunha Neto, Emmanoella Guaraná, Marks Melo Moura, Hudson Franklin Pessoa Veras, Angélica Maria Almeyda Zambrano, Eben North Broadbent, Emanuel Maia, Allan Libanio Pelissari, Luciano Rodrigo Lanssanova, Carlos Roberto Sanquetta, Ana Paula Dalla Corte

Forests · 19.11.2025 · 16 (11) · 1747

DOI: 10.3390/f16111747 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Forests, online erschienen am 19.11.2025. Verfasst von Ernandes Macedo da Cunha Neto und 10 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 75 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Council for Scientific and Technological Development, Coordination of Improvement of Higher Education Personnel—Brasil, CNPq.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The demand for forest materials necessitates advancements in forest management and inventory practices. We explore the integration of Unmanned Aerial Vehicles (UAVs) equipped with LiDAR sensors as a cost-effective alternative for precise forest monitoring. It evaluates the impact of varying point cloud densities on the accuracy of individual tree height estimation in Eucalyptus benthamii within Crop–Livestock–Forestry systems (15.9 ha and 357 individuals·ha−1). We use a DJI M600 Pro UAV with a Velodyne 32c Ultra Puck LiDAR sensor at the Center for Technological Innovation in Agriculture (NITA) in Brazil. The resulting point clouds were processed to generate Digital Terrain Models and Canopy Height Models at densities ranging from 5 to 2000 points per square meter (pts·m−2). Statistical analyses, including Pearson correlation, root mean square error, and bias, were conducted to compare UAV-LiDAR-derived heights with field measurements. We found that reduced point densities, particularly around 100 pts·m−2, maintained high accuracy in height estimation (RMSE = 17.129%, BIAS = −7.889%), with more than 90% in trees’ detection. UAV-LiDAR systems with optimized point cloud densities offer a viable solution for forest monitoring. 100 pts·m−2 is an optimal density, promoting faster data collection, lower battery consumption, and reduced computational costs on trees’ height estimates.

Förderung

  • National Council for Scientific and Technological Development
  • Coordination of Improvement of Higher Education Personnel—Brasil
  • CNPq

Zitieren

APA

Neto, E. M. D. C., Guaraná, E., Moura, M. M., Veras, H. F. P., Zambrano, A. M. A., Broadbent, E. N., Maia, E., Pelissari, A. L., Lanssanova, L. R., Sanquetta, C. R., & Corte, A. P. D. (2025). Optimizing UAV-LiDAR Point Density for Eucalyptus Height Estimation in Agroforestry. Forests, 16(11), 1747. https://doi.org/10.3390/f16111747

Vancouver

Neto EMDC, Guaraná E, Moura MM, Veras HFP, Zambrano AMA, Broadbent EN, et al. Optimizing UAV-LiDAR Point Density for Eucalyptus Height Estimation in Agroforestry. Forests. 2025;16(11):1747. doi:10.3390/f16111747

BibTeX
@article{Neto2025,
  author = {Neto, Ernandes Macedo da Cunha and Guaraná, Emmanoella and Moura, Marks Melo and Veras, Hudson Franklin Pessoa and Zambrano, Angélica Maria Almeyda and Broadbent, Eben North and Maia, Emanuel and Pelissari, Allan Libanio and Lanssanova, Luciano Rodrigo and Sanquetta, Carlos Roberto and Corte, Ana Paula Dalla},
  title = {Optimizing UAV-LiDAR Point Density for Eucalyptus Height Estimation in Agroforestry},
  journal = {Forests},
  year = {2025},
  volume = {16},
  number = {11},
  pages = {1747},
  doi = {10.3390/f16111747}
}
Kostenlos starten →