EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Application of Structural Adhesives in Glulam Beams: A Comparative Study

Leonor da Cunha Mastela, Pedro Gutemberg de Alcântara Segundinho, Fabricio Gomes Gonçalves, Clara Gaspar Fossi de Souza, Francisco Antônio Rocco Lahr, Daniela Minini, Michel Picanço Oliveira, Maria Alice Romanha Belumat, Caroline Palacio de Araujo

Forests · 05.09.2025 · 16 (9) · 1421

DOI: 10.3390/f16091421 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Forests, online erschienen am 05.09.2025. Verfasst von Leonor da Cunha Mastela und 8 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundação de Amparo à Pesquisa e Inovação do Estado do Espírito Santo, Conselho Nacional de Desenvolvimento Cientifico e Tecnológico (CNPq).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aimed to evaluate the adhesion behavior of wood from an E. urophylla × E. grandis clone using the application of melamine–urea–formaldehyde (MUF), resorcinol–formaldehyde (RF), and polyurethane (PUR) adhesives in test samples obtained from 12 glulam beams. Adhesives were characterized by their pH, viscosity, density, and solid content. The wood–adhesive interface was assessed through the shear strength, percentage of wood failure, delamination, and photomicrograph analysis. A microdensitometer with X-rays and a resistograph were used to determine the material density and drilling resistance of the elements. Adhesive pH values ranged from 6.35 to 9.05. MUF exhibited the highest viscosity (1169 cP), while the adhesive density varied between 1.29 and 1.67 g cm−3. No statistically significant difference in results was obtained for the shear strength in dry conditions. The MUF adhesive showed a lower percentage of wood failure compared to PUR and RF. In the delamination test, the wood beams glued with RF yielded the best results. Photomicrographs revealed the adhesive’s penetration into the wood’s anatomical structure. Densitometry and resistograph profiles accurately represented the beam balancing configuration. The adhesives PUR, RF, and MUF demonstrated suitability for producing glulam beams with the Eucalyptus clone wood evaluated in this study.

Förderung

  • Fundação de Amparo à Pesquisa e Inovação do Estado do Espírito Santo
  • Conselho Nacional de Desenvolvimento Cientifico e Tecnológico (CNPq)

Zitieren

APA

Mastela, L. D. C., Segundinho, P. G. D. A., Gonçalves, F. G., Souza, C. G. F. D., Lahr, F. A. R., Minini, D., Oliveira, M. P., Belumat, M. A. R., & Araujo, C. P. D. (2025). The Application of Structural Adhesives in Glulam Beams: A Comparative Study. Forests, 16(9), 1421. https://doi.org/10.3390/f16091421

Vancouver

Mastela LDC, Segundinho PGDA, Gonçalves FG, Souza CGFD, Lahr FAR, Minini D, et al. The Application of Structural Adhesives in Glulam Beams: A Comparative Study. Forests. 2025;16(9):1421. doi:10.3390/f16091421

BibTeX
@article{Mastela2025,
  author = {Mastela, Leonor da Cunha and Segundinho, Pedro Gutemberg de Alcântara and Gonçalves, Fabricio Gomes and Souza, Clara Gaspar Fossi de and Lahr, Francisco Antônio Rocco and Minini, Daniela and Oliveira, Michel Picanço and Belumat, Maria Alice Romanha and Araujo, Caroline Palacio de},
  title = {The Application of Structural Adhesives in Glulam Beams: A Comparative Study},
  journal = {Forests},
  year = {2025},
  volume = {16},
  number = {9},
  pages = {1421},
  doi = {10.3390/f16091421}
}
Kostenlos starten →