EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Epoxy as an Alternative Resin in Particleboard Production with Pine Wood Residues: Physical, Mechanical, and Microscopical Analyses of Panels at Three Resin Proportions

Antonio José Santos Junior, Marjorie Perosso Herradon, Matheus Viana de Souza, Sergio Augusto Mello da Silva, Victor Almeida De Araujo, Diego Henrique de Almeida, Herisson Ferreira dos Santos, André Luis Christoforo

Forests · 22.01.2025 · 16 (2) · 196

DOI: 10.3390/f16020196 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Forests, online erschienen am 22.01.2025. Verfasst von Antonio José Santos Junior und 7 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Coordenação de Aperfeiçoamento de Pessoal de Nível Superior—Brasil (CAPES)—Código de Financiamento 001.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Given the construction challenges and the impacts of industrial waste generation and the implications of using chemical adhesives, this study aims to evaluate epoxy as an alternative resin, whose application in the production of wood particleboards is still underexplored. In this regard, its results were compared with those of widely used adhesives, such as urea-formaldehyde (UF). Pine wood particles were used, and epoxy resin was applied as a binder in 5%, 10%, and 15% proportions. Panels were manufactured under pressing parameters of 5 N/mm2 for 10 min at 110 °C. Physical and mechanical properties of panels were evaluated using Brazilian, European, and American standards. The results showed that epoxy resin is potentially convenient for the particleboard industry, as the 15% trait panels met the P4 class criteria in the Brazilian and European standards and D-2 for the American code, and the 10% trait panels achieved the M-3i class for the American document. Although 5% adhesive was insufficient to envelop wood particles, these traits with greater percentages reached high enveloping ratings in the scanning electron microscopy (SEM) test, making epoxy resin viable for the panel industry as a potential alternative to formaldehyde-based adhesives.

Förderung

  • Coordenação de Aperfeiçoamento de Pessoal de Nível Superior—Brasil (CAPES)—Código de Financiamento 001

Zitieren

APA

Junior, A. J. S., Herradon, M. P., Souza, M. V. D., Silva, S. A. M. D., Araujo, V. A. D., Almeida, D. H. D., Santos, H. F. D., & Christoforo, A. L. (2025). Epoxy as an Alternative Resin in Particleboard Production with Pine Wood Residues: Physical, Mechanical, and Microscopical Analyses of Panels at Three Resin Proportions. Forests, 16(2), 196. https://doi.org/10.3390/f16020196

Vancouver

Junior AJS, Herradon MP, Souza MVD, Silva SAMD, Araujo VAD, Almeida DHD, et al. Epoxy as an Alternative Resin in Particleboard Production with Pine Wood Residues: Physical, Mechanical, and Microscopical Analyses of Panels at Three Resin Proportions. Forests. 2025;16(2):196. doi:10.3390/f16020196

BibTeX
@article{Junior2025,
  author = {Junior, Antonio José Santos and Herradon, Marjorie Perosso and Souza, Matheus Viana de and Silva, Sergio Augusto Mello da and Araujo, Victor Almeida De and Almeida, Diego Henrique de and Santos, Herisson Ferreira dos and Christoforo, André Luis},
  title = {Epoxy as an Alternative Resin in Particleboard Production with Pine Wood Residues: Physical, Mechanical, and Microscopical Analyses of Panels at Three Resin Proportions},
  journal = {Forests},
  year = {2025},
  volume = {16},
  number = {2},
  pages = {196},
  doi = {10.3390/f16020196}
}
Kostenlos starten →