EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluating Mechanical Properties and Suitability of Aspen (Populus tremula L.) Load Bearing Replacements in Historical Constructions

Barbora Herdová, Rastislav Lagaňa, Lukáš Štefančin, Jarmila Schmidtová

Forests · 28.12.2024 · 16 (1) · 34

DOI: 10.3390/f16010034 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Forests, online erschienen am 28.12.2024. Verfasst von Barbora Herdová und 3 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: VEGA Agency of the Ministry of Education, Research, Development and Youth of the Slovak Republic, IPA Internal project agency of the Technical University in Zvolen, EU NextGenerationEU through the Recovery and Resilience Plan for Slovakia.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The replacement of historical load-bearing wooden elements made from not commonly used species such as Populus tremula L. presents significant challenges. As these species are seldomly used in modern construction, a knowledge gap exists regarding their implementation in accordance with current building codes. This study investigates the mechanical properties of European aspen (Populus tremula L.) from central Slovakia as a potential replacement for historical structures. Notably, poplar species, including European aspen, have historically been utilized for construction across various landscapes in Europe. We conducted experimental testing on visually graded aspen timber to determine the dynamic modulus of elasticity (MOEdyn,ultr), modulus of elasticity (MOE), modulus of rupture (MOR), and density. The results were analyzed and compared to established standards for structural timber. Notably, the 5th percentileof the strength distribution (f0.05) was determined to be 28.78 MPa, while the characteristic strength (fk) was 26.23 MPa, and the modulus of elasticity (Eg12) was 13.60 MPa. The correlation between MOR and dynamic MOE facilitated the determination of MOR by non-destructive testing (NDT) using the Sylvatest Duo®. This simple linear model could grade 49% of boards into the higher strength class C30. The additional parameters and their interactions in multiregresssion models improved the predictability of the bending strength of aspen. The advanced model graded 68% of boards into C30. These characteristics, along with aspen’s growth potential, make it a promising candidate for replacing damaged structural elements in historical constructions. Our findings contribute to the understanding of the potential of European aspen as a structural timber, highlighting its viability as a fast-growing hardwood species.

Förderung

  • VEGA Agency of the Ministry of Education, Research, Development and Youth of the Slovak Republic
  • IPA Internal project agency of the Technical University in Zvolen
  • EU NextGenerationEU through the Recovery and Resilience Plan for Slovakia

Zitieren

APA

Herdová, B., Lagaňa, R., Štefančin, L., & Schmidtová, J. (2024). Evaluating Mechanical Properties and Suitability of Aspen (Populus tremula L.) Load Bearing Replacements in Historical Constructions. Forests, 16(1), 34. https://doi.org/10.3390/f16010034

Vancouver

Herdová B, Lagaňa R, Štefančin L, Schmidtová J. Evaluating Mechanical Properties and Suitability of Aspen (Populus tremula L.) Load Bearing Replacements in Historical Constructions. Forests. 2024;16(1):34. doi:10.3390/f16010034

BibTeX
@article{Herdov2024,
  author = {Herdová, Barbora and Lagaňa, Rastislav and Štefančin, Lukáš and Schmidtová, Jarmila},
  title = {Evaluating Mechanical Properties and Suitability of Aspen (Populus tremula L.) Load Bearing Replacements in Historical Constructions},
  journal = {Forests},
  year = {2024},
  volume = {16},
  number = {1},
  pages = {34},
  doi = {10.3390/f16010034}
}
Kostenlos starten →