Study on the Effect of Acrylic Acid Emulsion on the Properties of Poplar Wood Modified by Sodium Silicate Impregnation
Forests · 13.06.2023 · 14 (6) · 1221
DOI: 10.3390/f14061221 ↗Kurz gefasst
Fachartikel in der Zeitschrift Forests, online erschienen am 13.06.2023. Verfasst von Yuan Zhang und 6 weiteren Autor:innen. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Hunan Province, P.R. China, Scientific Research Project of Hunan Provincial Education Department, China.
Abstract (Originalsprache)
Inorganic silicate impregnation-modified fast-growing wood shows improved mechanical properties and thermal stability, but inorganic silicate agent loss and moisture absorption affect its processability. This study proposes a method to improve the impregnating agent loss and modified wood moisture absorption of poplar wood modified by using an acrylic acid emulsion/sodium silicate composite. The acrylic acid emulsion coated the sodium silicate and cell wall surfaces with a cured film that blocked water molecules from entering the modified wood. The acrylic acid emulsion adhered to the wood and sodium silicate, thus reducing impregnating agent loss. The addition of the acrylic acid emulsion maintained the excellent mechanical properties of sodium silicate-modified poplar wood and greatly improved its bending strength. The water absorption and moisture swelling rate were significantly decreased, and the dimensional stability of modified poplar wood was more than 50% higher than that of unmodified poplar wood. The thermogravimetric analysis (TG)results showed that the addition of organic components reduced the heat resistance of modified wood, but the thermal stability was still higher than unmodified wood. Fourier-transform infrared (FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS) results showed that acrylic esters in acrylic acid emulsion reacted with hydroxyl groups on sodium silicate and wood to form covalent bonds that improved the impregnating agent’s resistance to loss and reduced the moisture absorption of the wood. The modified poplar wood showed better dimensional stability and water resistance.
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Hunan Province, P.R. China
- Scientific Research Project of Hunan Provincial Education Department, China
- The Science and Technology Innovation Program of Hunan Province
Zitieren
APA
Zhang, Y., Guan, P., Ma, X., Li, P., Sun, Z., Li, X., & Zuo, Y. (2023). Study on the Effect of Acrylic Acid Emulsion on the Properties of Poplar Wood Modified by Sodium Silicate Impregnation. Forests, 14(6), 1221. https://doi.org/10.3390/f14061221
Vancouver
Zhang Y, Guan P, Ma X, Li P, Sun Z, Li X, et al. Study on the Effect of Acrylic Acid Emulsion on the Properties of Poplar Wood Modified by Sodium Silicate Impregnation. Forests. 2023;14(6):1221. doi:10.3390/f14061221
BibTeX
@article{Zhang2023,
author = {Zhang, Yuan and Guan, Pengfei and Ma, Xin and Li, Ping and Sun, Zhenyu and Li, Xianjun and Zuo, Yingfeng},
title = {Study on the Effect of Acrylic Acid Emulsion on the Properties of Poplar Wood Modified by Sodium Silicate Impregnation},
journal = {Forests},
year = {2023},
volume = {14},
number = {6},
pages = {1221},
doi = {10.3390/f14061221}
}
EUVIMED