Relation between Topography and Gap Characteristics in a Mixed Sessile Oak–Beech Old-Growth Forest
Forests · 18.01.2023 · 14 (2) · 188
DOI: 10.3390/f14020188 ↗Kurz gefasst
Fachartikel in der Zeitschrift Forests, online erschienen am 18.01.2023. Verfasst von Nicu Constantin Tudose und 4 weiteren Autor:innen. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 102 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Romanian National Authority for Scientific, FORCLIMSOC – Management forestier sustenabil adaptat schimbărilor climatice şi provocărilor societale, CresPerfInst – Increasing the institutional capacity and performance of INCDS ‘Marin Drăcea’ in the activity of RDI.
Abstract (Originalsprache)
The interest to assess the relationship between forest gap characteristics and topography features has been growing in the last decades. However, such an approach has not been studied in undisturbed mixed sessile oak–beech old-growth forests. Therefore, the present study carried out in one of the best-preserved sessile oak–beech old-growth forests in Europe, aims to assess the influence of topographic features (slope, altitude and aspect) on (i) some characteristics of canopies and expanded gaps (surface, diameter and perimeter) and (ii) the proportion of beech and sessile oak as bordering trees, gap fillers and gap makers. Through a complete gap survey on an area of 32 ha, 321 gaps were identified and mapped. The largest gaps and also the highest gap frequency (140) was found in the slope class (15.1–20°), while the gap frequency increased with altitude, with 99 gaps being recorded at 601–650 m a.s.l. The size and perimeter of the canopy and expanded gaps, as well as the number of gap makers, were negatively related to the slope and altitude. The expanded gap to canopy gap size ratio decreased with the slope and was positively related to the altitude, while a significant negative decrease in gap filler density with altitude was encountered. The sessile oak participation ratio as bordering trees forming the gap increased not only with the altitude but also with the slope. The topography plays an important role in the formation of gaps as well as in the characteristics of the future stand. This study provides valuable insights into the relationship between canopy gap characteristics and topography, which is useful information for forest owners that pursue the design of forest management toward nature-based solutions.
Förderung
- Romanian National Authority for Scientific
- FORCLIMSOC – Management forestier sustenabil adaptat schimbărilor climatice şi provocărilor societale
- CresPerfInst – Increasing the institutional capacity and performance of INCDS ‘Marin Drăcea’ in the activity of RDI
- Ministry of Research, Innovation and Digitization
Zitieren
APA
Tudose, N. C., Petritan, I. C., Toiu, F. L., Petritan, A., & Marin, M. (2023). Relation between Topography and Gap Characteristics in a Mixed Sessile Oak–Beech Old-Growth Forest. Forests, 14(2), 188. https://doi.org/10.3390/f14020188
Vancouver
Tudose NC, Petritan IC, Toiu FL, Petritan A, Marin M. Relation between Topography and Gap Characteristics in a Mixed Sessile Oak–Beech Old-Growth Forest. Forests. 2023;14(2):188. doi:10.3390/f14020188
BibTeX
@article{Tudose2023,
author = {Tudose, Nicu Constantin and Petritan, Ion Catalin and Toiu, Florin Lucian and Petritan, Any-Mary and Marin, Mirabela},
title = {Relation between Topography and Gap Characteristics in a Mixed Sessile Oak–Beech Old-Growth Forest},
journal = {Forests},
year = {2023},
volume = {14},
number = {2},
pages = {188},
doi = {10.3390/f14020188}
}
EUVIMED