EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Sustainable Material Substitution in Aircraft Structures: A Risk-Informed Life Cycle Assessment

Ana-Maria Nicolau, Mihnea Cosmin Costoiu, Augustin Semenescu

Eng · 07.11.2026 · 7 (11) · 627

DOI: 10.3390/eng7110627 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Eng, online erschienen am 07.11.2026. Verfasst von Ana-Maria Nicolau und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National University of Science and Technology Politehnica Bucharest.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Bio-based and recycled composites are candidate replacements for conventional materials in aircraft secondary structures, but their environmental benefit is usually assessed deterministically and without the engineering constraints relevant to preliminary sizing and certification readiness. This study presents a risk-informed life cycle assessment (LCA) framework that couples structural sizing based on statistical design allowables; cradle-to-grave greenhouse gas accounting; Monte Carlo uncertainty propagation; and a failure mode, effects, and criticality analysis of engineering risks. The framework is applied to a honeycomb sandwich panel of a single-aisle aircraft with faces of aluminium 2024-T3, virgin carbon/epoxy, recycled carbon fibre/polyamide 11 and flax/bio-based epoxy. The use phase accounted for more than 99.7% of life cycle emissions, so structural mass governed every comparison. At the reference load of 50 N/mm (load-based functional unit), virgin carbon/epoxy had the lowest impact (7.4 t CO2-eq per panel, 41% below aluminium). Combined statistical and hot/wet allowable knockdowns increased the impact of the recycled and flax panels by 50% and 60%, respectively, whereas at 25 N/mm, the recycled panel was 7% better than virgin carbon/epoxy. Risk adjustment added 13% and 30% to the two sustainable options (20% and 37% when the risks were evaluated jointly through nonlinear sizing). Variance-based sensitivity analysis showed that allowable-related parameters, not inventory data, controlled the material ranking. These conclusions were unchanged when the stacking sequences, hot/wet stiffness degradation, mechanical effect of the fire-retardant system, and correlations between inputs were accounted for.

Förderung

  • National University of Science and Technology Politehnica Bucharest

Zitieren

APA

Nicolau, A., Costoiu, M. C., & Semenescu, A. (2026). Sustainable Material Substitution in Aircraft Structures: A Risk-Informed Life Cycle Assessment. Eng, 7(11), 627. https://doi.org/10.3390/eng7110627

Vancouver

Nicolau A, Costoiu MC, Semenescu A. Sustainable Material Substitution in Aircraft Structures: A Risk-Informed Life Cycle Assessment. Eng. 2026;7(11):627. doi:10.3390/eng7110627

BibTeX
@article{Nicolau2026,
  author = {Nicolau, Ana-Maria and Costoiu, Mihnea Cosmin and Semenescu, Augustin},
  title = {Sustainable Material Substitution in Aircraft Structures: A Risk-Informed Life Cycle Assessment},
  journal = {Eng},
  year = {2026},
  volume = {7},
  number = {11},
  pages = {627},
  doi = {10.3390/eng7110627}
}
Kostenlos starten →