EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Silica Fume on Performance of Alkali-Activated Cementitious Materials and Prediction via BP Neural Network

Shuang Song, He Li, Ran Zheng, Yiming Wang, Jingyao Li

Eng · 06.11.2026 · 7 (11) · 622

DOI: 10.3390/eng7110622 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Eng, online erschienen am 06.11.2026. Verfasst von Shuang Song und 4 weiteren Autor:innen. Die Arbeit nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Jilin Province, Research and Development Project of the Jilin Provincial Department of Housing and Urban-Rural Development, Jilin University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Alkali-activated slag–fly ash cementitious materials (AAMs) are low-carbon and mechanically favorable, but suffer from pronounced drying shrinkage and high brittleness. Silica fume (SF), with its large specific surface area and strong pozzolanic reactivity, offers a promising route to mitigate these drawbacks. This study systematically investigates how SF dosage affects workability, mechanical properties, drying shrinkage behavior, chloride resistance, and microstructural evolution in alkali-activated slag–fly ash mortars. The optimal baseline mixture is determined as slag/fly ash = 3:1, activator content 15%, and water/binder ratio 0.26. At an SF replacement level of 10%, compressive and flexural strengths peak at 3, 28, and 90 days, with 90-day compressive strength reaching 83 MPa, about 24% higher than the SF-free control. Concurrently, SF exerts a marked retarding effect on drying shrinkage; at 15% replacement, 90-day shrinkage is reduced by more than 43%. Microstructural analyses reveal that SF’s micro-filler and pozzolanic reactions promote additional C-S-H/C-A-S-H gel formation, substantially densifying the matrix. However, when SF exceeds 10%, workability deteriorates, and strength slightly declines; moreover, the chloride migration coefficient increases with SF content, implying excessive SF may adversely affect chloride durability. We developed a BP neural network model to quantify nonlinear relationships between SF content and compressive/flexural strengths, shrinkage, and the chloride migration coefficient, achieving high predictive accuracy (training R2 = 0.90763, testing R2 = 0.81832) and providing a reliable data-driven tool for mix proportion optimization and performance prediction. In summary, proper SF dosage markedly enhances mechanical and shrinkage properties, yet careful consideration of trade-offs with workability and durability is required.

Förderung

  • Natural Science Foundation of Jilin Province
  • Research and Development Project of the Jilin Provincial Department of Housing and Urban-Rural Development
  • Jilin University

Zitieren

APA

Song, S., Li, H., Zheng, R., Wang, Y., & Li, J. (2026). Influence of Silica Fume on Performance of Alkali-Activated Cementitious Materials and Prediction via BP Neural Network. Eng, 7(11), 622. https://doi.org/10.3390/eng7110622

Vancouver

Song S, Li H, Zheng R, Wang Y, Li J. Influence of Silica Fume on Performance of Alkali-Activated Cementitious Materials and Prediction via BP Neural Network. Eng. 2026;7(11):622. doi:10.3390/eng7110622

BibTeX
@article{Song2026,
  author = {Song, Shuang and Li, He and Zheng, Ran and Wang, Yiming and Li, Jingyao},
  title = {Influence of Silica Fume on Performance of Alkali-Activated Cementitious Materials and Prediction via BP Neural Network},
  journal = {Eng},
  year = {2026},
  volume = {7},
  number = {11},
  pages = {622},
  doi = {10.3390/eng7110622}
}
Kostenlos starten →