EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Aerodynamic Design and Numerical Assessment of a 1.5 kW Helical Vertical-Axis Wind Turbine Using DMST and Three-Dimensional CFD

Sergio Neftalí Constantino Valdovinos, José Rafael Dorrego Portela, Víctor Iván Moreno Oliva, Reynaldo Iracheta Cortez, J. Eli Eduardo González-Durán, Quetzalcoatl Hernandez-Escobedo, Jesus Alejandro Franco, Dante Ruiz-Robles

Eng · 06.11.2026 · 7 (11) · 618

DOI: 10.3390/eng7110618 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Eng, online erschienen am 06.11.2026. Verfasst von Sergio Neftalí Constantino Valdovinos und 7 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Helical vertical-axis wind turbines are well suited to small-scale distributed generation because they need no yaw mechanism and can operate effectively in changing wind conditions. However, their aerodynamic design requires comparing configurations without relying solely on computationally expensive simulations. This article describes the design and numerical evaluation of a helical rotor for a vertical-axis wind turbine coupled to a 1.5 kW generator. It combines wind resource analysis, rotor sizing, and a double multiple streamtube (DMST) model, and compares the results with computational fluid dynamics (CFD) simulations. The resulting three-bladed rotor, designated DU-H-18, uses the DU-06-W-200 airfoil and a 63° helix angle. The DMST model predicted a maximum power coefficient of 0.4071 at a tip-speed ratio of 2.5, whereas CFD yielded a maximum of 0.3806 at a tip-speed ratio of 3, with torque and drag coefficients of 0.1269 and 0.0326, respectively. At the common operating condition near λ = 3, the predictions obtained with the selected DMST and CFD numerical settings differed by approximately 3%. However, a three-level temporal-resolution assessment using Δt = 0.005, 0.0025, and 0.00125 s showed that the CFD integral torque remained sensitive to temporal discretization. Therefore, this difference of approximately 3% is interpreted as conditional on the selected numerical settings rather than as demonstrated agreement between time-step-independent solutions. DMST nevertheless captures the overall performance trend and can support preliminary geometric assessment, whereas CFD remains necessary to characterize viscous losses, flow separation, blade–wake interactions, and three-dimensional vortex structures.

Zitieren

APA

Valdovinos, S. N. C., Portela, J. R. D., Oliva, V. I. M., Cortez, R. I., González-Durán, J. E. E., Hernandez-Escobedo, Q., Franco, J. A., & Ruiz-Robles, D. (2026). Aerodynamic Design and Numerical Assessment of a 1.5 kW Helical Vertical-Axis Wind Turbine Using DMST and Three-Dimensional CFD. Eng, 7(11), 618. https://doi.org/10.3390/eng7110618

Vancouver

Valdovinos SNC, Portela JRD, Oliva VIM, Cortez RI, González-Durán JEE, Hernandez-Escobedo Q, et al. Aerodynamic Design and Numerical Assessment of a 1.5 kW Helical Vertical-Axis Wind Turbine Using DMST and Three-Dimensional CFD. Eng. 2026;7(11):618. doi:10.3390/eng7110618

BibTeX
@article{Valdovinos2026,
  author = {Valdovinos, Sergio Neftalí Constantino and Portela, José Rafael Dorrego and Oliva, Víctor Iván Moreno and Cortez, Reynaldo Iracheta and González-Durán, J. Eli Eduardo and Hernandez-Escobedo, Quetzalcoatl and Franco, Jesus Alejandro and Ruiz-Robles, Dante},
  title = {Aerodynamic Design and Numerical Assessment of a 1.5 kW Helical Vertical-Axis Wind Turbine Using DMST and Three-Dimensional CFD},
  journal = {Eng},
  year = {2026},
  volume = {7},
  number = {11},
  pages = {618},
  doi = {10.3390/eng7110618}
}
Infokarte | EUVIMED

Artikeldaten derzeit nicht verfügbar.

Recherche