Transforming Denim Waste: Super Glue-Enhanced Composite Materials
Eng · 07.08.2026 · 7 (8) · 396
DOI: 10.3390/eng7080396 ↗Kurz gefasst
Fachartikel in der Zeitschrift Eng, online erschienen am 07.08.2026. Verfasst von Christina Gioti und 6 weiteren Autor:innen. Die Arbeit nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union—NextGenerationEU.
Abstract (Originalsprache)
The present study demonstrated the fabrication of a sustainable, high-performance composite by upcycling waste denim fabric within a cyanoacrylate matrix reinforced with B4C micro-particles (4, 7, and 10 wt%). XRD and SEM analyses confirmed the successful integration of the ceramic filler and effective fiber encapsulation, with particle agglomeration identified at 10 wt% loading. The 7 wt% B4C composition exhibited the highest static mechanical performance, with a tensile strength of ~20.3 ± 1.3 MPa and Young’s modulus of 1.17 GPa—improvements of ~22.8% and ~41% over the unreinforced denim–cyanoacrylate composite—while at 10 wt% B4C the ultimate tensile strength declined below the unreinforced baseline and the Young’s modulus reverted to a comparable value, likely reflecting agglomeration-induced stress concentration as a major contributing factor. Under dynamic impact loading, the peak contact force increased monotonically from 0.34 kN to 1.31 kN with increasing B4C content yet remained well below the thresholds specified by international impact protection standard thresholds across all compositions. This divergence between static and dynamic responses indicates that the increase in contact force with B4C content reflects progressive stiffening and more direct load transfer rather than improved energy attenuation, whereas tensile performance depends critically on dispersion quality and fiber–matrix adhesion. Surface wettability analysis showed a marked increase in hydrophobicity, with the water contact angle rising from 105 ± 4° to 133 ± 4° (for the DSGB-7 wt% composite), consistent with a Cassie–Baxter wetting regime. These preliminary results suggest that B4C-reinforced waste denim–cyanoacrylate composites merit further investigation as candidate materials platform for protective textile applications, pending validation through larger-scale, standardized testing.
Förderung
- European Union—NextGenerationEU
Zitieren
APA
Gioti, C., Moschovas, D., Avgeropoulos, A., Salmas, C. E., Agathopoulos, S., Bourlinos, A. B., & Karakassides, M. A. (2026). Transforming Denim Waste: Super Glue-Enhanced Composite Materials. Eng, 7(8), 396. https://doi.org/10.3390/eng7080396
Vancouver
Gioti C, Moschovas D, Avgeropoulos A, Salmas CE, Agathopoulos S, Bourlinos AB, et al. Transforming Denim Waste: Super Glue-Enhanced Composite Materials. Eng. 2026;7(8):396. doi:10.3390/eng7080396
BibTeX
@article{Gioti2026,
author = {Gioti, Christina and Moschovas, Dimitrios and Avgeropoulos, Apostolos and Salmas, Constantinos E. and Agathopoulos, Simeon and Bourlinos, Athanasios B. and Karakassides, Michael A.},
title = {Transforming Denim Waste: Super Glue-Enhanced Composite Materials},
journal = {Eng},
year = {2026},
volume = {7},
number = {8},
pages = {396},
doi = {10.3390/eng7080396}
}
EUVIMED