Mix Proportion Optimization of Nano SiO2-Fly Ash-Metakaolin Geopolymer Based on Orthogonal Experiment
Eng · 07.08.2026 · 7 (8) · 395
DOI: 10.3390/eng7080395 ↗Kurz gefasst
Fachartikel in der Zeitschrift Eng, online erschienen am 07.08.2026. Verfasst von Bo Yuan und 5 weiteren Autor:innen. Die Arbeit nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Education Department of Hunan Province, Department of Science and Technology of Hunan Province, Science and Technology Department of Hubei Province.
Abstract (Originalsprache)
Fly ash-metakaolin geopolymer has considerable potential for low-carbon and high-strength applications. However, its performance is highly dependent on preparation parameters and curing conditions, and its mix proportion optimization and nano-modification mechanism still require further clarification. In this study, under the condition that the mass ratio of metakaolin to fly ash was fixed at 9:1, an L16 (45) orthogonal experiment was carried out using nano-SiO2 content, liquid-to-solid ratio, alkali equivalent, sodium silicate modulus, and curing temperature as independent variables. Range analysis and analysis of variance were employed to investigate the response patterns of slurry fluidity, setting time, and compressive strength under variations in these factors, while XRD, SEM-EDS, and FTIR were used to reveal the modification mechanism of nano-SiO2. The results show that the early-age compressive strength is governed by alkali equivalent, whereas the later-age strength is jointly affected by multiple factors, with the differences among their effects gradually decreasing. Alkali equivalent and liquid-to-solid ratio have comparable effects on slurry fluidity, with contribution rates of 33.83% and 30.97%, respectively. Setting time is most sensitive to changes in sodium silicate modulus, which contributes 92.76% and 90.54% to the initial and final setting times, respectively. After the incorporation of an appropriate amount of nano-SiO2, the amorphous gel characteristics, Si-O-T bonding structure, and fracture-surface compactness of the specimens were all enhanced. However, excessive incorporation tends to cause particle agglomeration and increase the water demand of the system, weakening the continuity of geopolymerization. The specimen with better overall performance was prepared with 1% nano-SiO2, a liquid-to-solid ratio of 0.84, an alkali equivalent of 24%, and a sodium silicate modulus of 1.4, and cured at 40 °C.
Förderung
- Education Department of Hunan Province
- Department of Science and Technology of Hunan Province
- Science and Technology Department of Hubei Province
Zitieren
APA
Yuan, B., Liu, S., Wu, Y., Xu, F., Chen, Y., & Luo, Z. (2026). Mix Proportion Optimization of Nano SiO2-Fly Ash-Metakaolin Geopolymer Based on Orthogonal Experiment. Eng, 7(8), 395. https://doi.org/10.3390/eng7080395
Vancouver
Yuan B, Liu S, Wu Y, Xu F, Chen Y, Luo Z. Mix Proportion Optimization of Nano SiO2-Fly Ash-Metakaolin Geopolymer Based on Orthogonal Experiment. Eng. 2026;7(8):395. doi:10.3390/eng7080395
BibTeX
@article{Yuan2026,
author = {Yuan, Bo and Liu, Shun and Wu, Yu and Xu, Fu and Chen, Yinghao and Luo, Zhengdong},
title = {Mix Proportion Optimization of Nano SiO2-Fly Ash-Metakaolin Geopolymer Based on Orthogonal Experiment},
journal = {Eng},
year = {2026},
volume = {7},
number = {8},
pages = {395},
doi = {10.3390/eng7080395}
}
EUVIMED