EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Effects of Hydroxypropyl Methyl Cellulose (HPMC) on the Workability, Mechanical Strength, and Thermal Conductivity of Microencapsulated Phase Change Material (MPCM) Mortar

Fan Feng, Chuangsheng Cai, Yu Wu, Yongqiang An, Penglin Li, Weibin Wen

Eng · 25.06.2026 · 7 (7) · 307

DOI: 10.3390/eng7070307 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Eng, online erschienen am 25.06.2026. Verfasst von Fan Feng und 5 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: China Harbour Engineering Company Limited Science and Technology Research and Development Plan, Open Fund of National Engineering Laboratory for Southern Forestry Ecological Application Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To enhance the performance of microencapsulated phase change material (MPCM) mortar, hydroxypropyl methyl cellulose (HPMC) was incorporated. This study tested the mortar’s consistency, water retention, water absorption, compressive strength, and thermal conductivity under varying contents of MPCM (as an equivalent volume replacement of sand) and mass contents of HPMC. The results indicate that increasing both MPCM and HPMC contents reduces mortar consistency. Specifically, when HPMC content is 0.05%, 0.10%, and 0.15%, the mortar’s consistency decreases by approximately 24.38%, 35.34%, and 41.30%, respectively, in MPCM-free mortar, with a maximum combined reduction of 74% observed in the 0.15% HPMC and 4% MPCM formulation. MPCM shows a negligible effect on water retention, while HPMC positively influences this property, though not significantly. In contrast, HPMC has little impact on water absorption, whereas MPCM significantly increases it: as MPCM content rises from 0% to 1%, 2%, 3%, and 4%, the mortar’s water absorption increases by 22.55%, 58.82%, 121.57%, and 200.00%, respectively. Both HPMC and MPCM additions lead to reductions in the mortar’s compressive and bond strengths. Notably, a 0.10% HPMC content decreases thermal conductivity by approximately 12% compared to mortar without HPMC. Using the corresponding fitting formulas, predictive values for various performance indicators can be accurately derived.

Förderung

  • China Harbour Engineering Company Limited Science and Technology Research and Development Plan
  • Open Fund of National Engineering Laboratory for Southern Forestry Ecological Application Technology

Zitieren

APA

Feng, F., Cai, C., Wu, Y., An, Y., Li, P., & Wen, W. (2026). The Effects of Hydroxypropyl Methyl Cellulose (HPMC) on the Workability, Mechanical Strength, and Thermal Conductivity of Microencapsulated Phase Change Material (MPCM) Mortar. Eng, 7(7), 307. https://doi.org/10.3390/eng7070307

Vancouver

Feng F, Cai C, Wu Y, An Y, Li P, Wen W. The Effects of Hydroxypropyl Methyl Cellulose (HPMC) on the Workability, Mechanical Strength, and Thermal Conductivity of Microencapsulated Phase Change Material (MPCM) Mortar. Eng. 2026;7(7):307. doi:10.3390/eng7070307

BibTeX
@article{Feng2026,
  author = {Feng, Fan and Cai, Chuangsheng and Wu, Yu and An, Yongqiang and Li, Penglin and Wen, Weibin},
  title = {The Effects of Hydroxypropyl Methyl Cellulose (HPMC) on the Workability, Mechanical Strength, and Thermal Conductivity of Microencapsulated Phase Change Material (MPCM) Mortar},
  journal = {Eng},
  year = {2026},
  volume = {7},
  number = {7},
  pages = {307},
  doi = {10.3390/eng7070307}
}
Kostenlos starten →