EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Hyper-Viscoelastic Polyurethane-Based Multistage Vibration Isolator: Constitutive Modeling and Shock Attenuation Performance

Yuanfu Wei, Hongyi Zhang, Zhengqing Chen, Wenxi Wang, Yihao Cheng, Haiming Jiang, Xixi Wen

Eng · 08.06.2026 · 7 (6) · 283

DOI: 10.3390/eng7060283 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Eng, online erschienen am 08.06.2026. Verfasst von Yuanfu Wei und 6 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Project of Yuelushan Center for Industrial Innovation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To address the insufficient damping and instability tendency of metal coil spring isolators subjected to intense impact loading, a multi-stage vibration isolation configuration integrating polyurethane, springs, and eddy current dampers is proposed. Dynamic models for both single-stage and multi-stage isolation systems are formulated, and a corresponding simulation model is developed in MATLAB R2023b/Simulink to investigate the peak suppression and attenuation characteristics of the multi-stage isolation under impact. To characterize the nonlinear finite deformation and time-dependent response of polyurethane, a hyperelastic-viscoelastic constitutive model is established by coupling the Ogden hyperelastic model with a generalized Maxwell viscoelastic model, with model parameters identified through quasi-static compression and stress relaxation tests. Drop impact experiments are performed to compare the displacement response, top- and bottom-plate peak accelerations, and vibration isolation rate between a polyurethane-spring-eddy-current multi-stage isolator and a spring-spring-eddy-current multi-stage isolator. The results demonstrate that the multi-stage structure enables staged dissipation of the impact energy, substantially reducing both the peak acceleration and the displacement stroke of the isolated mass. Under all drop test conditions, the polyurethane-based multi-stage isolator yields lower top-plate output peak acceleration and higher isolation rate than its all-spring counterpart, confirming its superior isolation performance. Envelope fitting of the simulation-based output acceleration with experimental inputs reveals that the all-spring multi-stage isolator exhibits a higher attenuation rate and equivalent damping ratio, whereas the polyurethane-based isolator achieves more effective suppression of the output peak level under severe impact conditions.

Förderung

  • National Natural Science Foundation of China
  • Project of Yuelushan Center for Industrial Innovation

Zitieren

APA

Wei, Y., Zhang, H., Chen, Z., Wang, W., Cheng, Y., Jiang, H., & Wen, X. (2026). A Hyper-Viscoelastic Polyurethane-Based Multistage Vibration Isolator: Constitutive Modeling and Shock Attenuation Performance. Eng, 7(6), 283. https://doi.org/10.3390/eng7060283

Vancouver

Wei Y, Zhang H, Chen Z, Wang W, Cheng Y, Jiang H, et al. A Hyper-Viscoelastic Polyurethane-Based Multistage Vibration Isolator: Constitutive Modeling and Shock Attenuation Performance. Eng. 2026;7(6):283. doi:10.3390/eng7060283

BibTeX
@article{Wei2026,
  author = {Wei, Yuanfu and Zhang, Hongyi and Chen, Zhengqing and Wang, Wenxi and Cheng, Yihao and Jiang, Haiming and Wen, Xixi},
  title = {A Hyper-Viscoelastic Polyurethane-Based Multistage Vibration Isolator: Constitutive Modeling and Shock Attenuation Performance},
  journal = {Eng},
  year = {2026},
  volume = {7},
  number = {6},
  pages = {283},
  doi = {10.3390/eng7060283}
}
Kostenlos starten →