EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Long-Term Creep Performance of UHPC Precast Assembled Beams Under Different Curing Conditions

Yishun Liu, Mingfu Ou, Hao Zuo, Hong Qiu, Hui Zheng

Eng · 19.04.2026 · 7 (4) · 186

DOI: 10.3390/eng7040186 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Eng, online erschienen am 19.04.2026. Verfasst von Yishun Liu und 4 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Hunan Province, Scientific Research Foundation of Hunan Provincial Education Department.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ultra-high-performance concrete (UHPC) is widely used due to its strength, toughness, and durability. Shrinkage issues are the primary cause of concrete cracking and one of the main factors limiting the widespread application of UHPC in structural engineering. The shrinkage properties of UHPC vary depending on curing conditions. Research indicates that after thermal curing, the pore structure of UHPC is optimized, resulting in a significant reduction in shrinkage values. Based on the superposition principle, temperature creep coefficients and humidity creep coefficients are introduced to correct the temperature and humidity in the test environment to a constant temperature (20 °C) and humidity (75% relative humidity). The B3 coefficient of variation method was used to compare five different creep prediction models. The CEB-FIP2010 model was selected as the benchmark creep model, and curing condition coefficients were incorporated into the model to establish a comprehensive creep calculation model considering curing conditions. After 550 days of steam curing, the shrinkage strain of the UHPC specimens was approximately 28.9% of that of the uncured specimens. The additional creep deformation caused by temperature and humidity in the uncured and steam-cured specimens accounted for approximately 10% and 20% of the total creep deformation over 550 days, respectively. The strain development rates for both tensile and compressive strains in steam-cured specimens were lower than those in uncured specimens. A ten-year long-term creep simulation of UHPC precast joint beams was conducted using the finite element software Midas-Fea, and the comparison results validated the reliability of the comprehensive creep model.

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Hunan Province
  • Scientific Research Foundation of Hunan Provincial Education Department

Zitieren

APA

Liu, Y., Ou, M., Zuo, H., Qiu, H., & Zheng, H. (2026). Long-Term Creep Performance of UHPC Precast Assembled Beams Under Different Curing Conditions. Eng, 7(4), 186. https://doi.org/10.3390/eng7040186

Vancouver

Liu Y, Ou M, Zuo H, Qiu H, Zheng H. Long-Term Creep Performance of UHPC Precast Assembled Beams Under Different Curing Conditions. Eng. 2026;7(4):186. doi:10.3390/eng7040186

BibTeX
@article{Liu2026,
  author = {Liu, Yishun and Ou, Mingfu and Zuo, Hao and Qiu, Hong and Zheng, Hui},
  title = {Long-Term Creep Performance of UHPC Precast Assembled Beams Under Different Curing Conditions},
  journal = {Eng},
  year = {2026},
  volume = {7},
  number = {4},
  pages = {186},
  doi = {10.3390/eng7040186}
}
Kostenlos starten →