Design and Performance Study of Stiffness-Reduced Rubber Isolation Bearings
Eng · 27.03.2026 · 7 (4) · 152
DOI: 10.3390/eng7040152 ↗Kurz gefasst
Fachartikel in der Zeitschrift Eng, online erschienen am 27.03.2026. Verfasst von Xianjie Wang und 5 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Yunnan Province “Support Program for Talents in Developing Yunnan” Youth Talent Special Project, Basic Research General Project of Yunnan Provincial Science and Technology Department https://ror.org/03whqdf70, Yunnan Provincial Education Department Scientific Research Fund Project https://ror.org/02yrxdp92.
Abstract (Originalsprache)
To address the poor vertical vibration reduction in laminated rubber bearings, the high cost and low practicality of combined three-dimensional isolation bearings, and the low load-bearing capacity of thick-layer rubber bearings, this paper proposes a stiffness-reduced rubber isolation bearing. Based on the deformation coordination principle and the incompressibility of thick-layer rubber, theoretical formulas for the horizontal and vertical stiffness of the proposed bearing are established. Compression–shear tests and finite element simulations are then conducted to investigate its mechanical properties under vertical compressive stress. The results show that the theoretical predictions agree well with the simulation and experimental results. The maximum error of horizontal stiffness is no more than 5.6% relative to the finite element simulation and no more than 3.3% relative to the experimental results, while the maximum error of vertical stiffness is no more than 7.9% and 2.3%, respectively. Compared with the traditional laminated rubber bearing, the stiffness-reduced rubber isolation bearing reduces the average vertical stiffness by 35.8% while maintaining stable horizontal mechanical performance and overall integrity within the tested range. Furthermore, parametric analysis indicates that the stiffness can be effectively adjusted by changing the inner-diameter/outer-diameter ratio. A case study based on measured metro-induced vibration time-history curves further shows that the proposed bearing has potential for achieving the dual objective of horizontal isolation and vertical vibration reduction.
Förderung
- Yunnan Province “Support Program for Talents in Developing Yunnan” Youth Talent Special Project
- Basic Research General Project of Yunnan Provincial Science and Technology Department https://ror.org/03whqdf70
- Yunnan Provincial Education Department Scientific Research Fund Project https://ror.org/02yrxdp92
- National Natural Science Foundation of China https://ror.org/01h0zpd94
Zitieren
APA
Wang, X., Lu, C., Wang, L., Chen, Y., Yang, J., & Deng, S. (2026). Design and Performance Study of Stiffness-Reduced Rubber Isolation Bearings. Eng, 7(4), 152. https://doi.org/10.3390/eng7040152
Vancouver
Wang X, Lu C, Wang L, Chen Y, Yang J, Deng S. Design and Performance Study of Stiffness-Reduced Rubber Isolation Bearings. Eng. 2026;7(4):152. doi:10.3390/eng7040152
BibTeX
@article{Wang2026,
author = {Wang, Xianjie and Lu, Chengpeng and Wang, Linjian and Chen, Yiming and Yang, Jiayun and Deng, Shifang},
title = {Design and Performance Study of Stiffness-Reduced Rubber Isolation Bearings},
journal = {Eng},
year = {2026},
volume = {7},
number = {4},
pages = {152},
doi = {10.3390/eng7040152}
}
EUVIMED