EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimisation of 3D Printing Parameters to Enhance the Ultimate Tensile Strength of PA6 Polymer Products

Jure Marijić, Mirko Karakašić, Ivan Grgić, Željko Ivandić

Eng · 10.03.2026 · 7 (3) · 127

DOI: 10.3390/eng7030127 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Eng, online erschienen am 10.03.2026. Verfasst von Jure Marijić und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Slavonski Brod, European Union—NextGenerationEU.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing (AM) technologies are a key tool in producing complex and functional polymer parts, with Fused Deposition Modelling (FDM) emerging as the most widely used technique. PA6 polyamide is gaining increasing importance due to its high strength, wear resistance and processability, making it suitable for polymer product manufacturing. However, the mechanical properties of PA6 FDM components are largely determined by process parameters, and their optimisation is necessary to achieve stable and reliable properties. In this study, the influence of nozzle temperature, infill density and infill geometry on the tensile strength of PA6 specimens was investigated. The Central Composite Design (CCD) method was used for process modelling and optimisation, along with statistical analysis and experimental validation. The individual effects of the analysed parameters were confirmed by a preliminary experiment, while a detailed analysis of their mutual relationships was enabled through the main experiment. Analysis of the results showed that increasing both temperature and infill density positively affects tensile strength, regardless of the infill structure. The accuracy and reliability of the model were confirmed by validation, with a coefficient of determination R2 = 0.8958 and a high level of agreement between experimental and predicted data. By optimising the process parameters, maximum tensile stresses of 17.705 MPa were achieved with an infill density of 74.142%, a Triangle-Hexa infill pattern, and a nozzle temperature of 254.142 °C. The confirmation experiment validated the optimised parameters, and the results provide a statistically validated framework for optimising the tensile performance of PA6 components manufactured by FDM under controlled laboratory conditions.

Förderung

  • University of Slavonski Brod
  • European Union—NextGenerationEU

Zitieren

APA

Marijić, J., Karakašić, M., Grgić, I., & Ivandić, Ž. (2026). Optimisation of 3D Printing Parameters to Enhance the Ultimate Tensile Strength of PA6 Polymer Products. Eng, 7(3), 127. https://doi.org/10.3390/eng7030127

Vancouver

Marijić J, Karakašić M, Grgić I, Ivandić Ž. Optimisation of 3D Printing Parameters to Enhance the Ultimate Tensile Strength of PA6 Polymer Products. Eng. 2026;7(3):127. doi:10.3390/eng7030127

BibTeX
@article{Mariji2026,
  author = {Marijić, Jure and Karakašić, Mirko and Grgić, Ivan and Ivandić, Željko},
  title = {Optimisation of 3D Printing Parameters to Enhance the Ultimate Tensile Strength of PA6 Polymer Products},
  journal = {Eng},
  year = {2026},
  volume = {7},
  number = {3},
  pages = {127},
  doi = {10.3390/eng7030127}
}
Kostenlos starten →