EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Field Blast Tests and Finite Element Analysis of A36 Steel Sheets Subjected to High Explosives

Anselmo S. Augusto, Girum Urgessa, José A. F. F. Rocco, Fausto B. Mendonça, Koshun Iha

Eng · 05.08.2025 · 6 (8) · 187

DOI: 10.3390/eng6080187 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Eng, online erschienen am 05.08.2025. Verfasst von Anselmo S. Augusto und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Blast mitigation of structures is an important research topic due to increasing intentional and accidental human-induced threats and hazards. This research area is essential to building capabilities in sustaining structural protection, site planning, protective design efficiency, occupant safety, and response and recovery plans. This paper investigates experimental tests and finite element analysis (FEM) of thin A36 steel sheets subjected to blast. Six field blast tests were performed at standoff distances of 300 mm and 500 mm. The explosive charges comprised 334 g of bare Composition B, and the steel sheets were 2 mm thick. The experimental results, derived from the analysis of high-speed camera recordings of the blast events, were compared with FEM simulations conducted using Abaqus®/Explicit version 6.10. Three constitutive material models were considered in these simulations. First, the FEM simulation results were compared with experimental results. It was shown that the FEM analysis provided reliable results and was proven to be robust and cost-effective. Second, an extensive set of 460 additional numerical simulations was carried out as a parametric study involving varying standoff distances and steel sheet thicknesses. The results and methodologies presented in this paper offer valuable and original insights for engineers and researchers aiming to predict damage to steel structures during real detonation events and to design blast-resistant structures.

Zitieren

APA

Augusto, A. S., Urgessa, G., Rocco, J. A. F. F., Mendonça, F. B., & Iha, K. (2025). Field Blast Tests and Finite Element Analysis of A36 Steel Sheets Subjected to High Explosives. Eng, 6(8), 187. https://doi.org/10.3390/eng6080187

Vancouver

Augusto AS, Urgessa G, Rocco JAFF, Mendonça FB, Iha K. Field Blast Tests and Finite Element Analysis of A36 Steel Sheets Subjected to High Explosives. Eng. 2025;6(8):187. doi:10.3390/eng6080187

BibTeX
@article{Augusto2025,
  author = {Augusto, Anselmo S. and Urgessa, Girum and Rocco, José A. F. F. and Mendonça, Fausto B. and Iha, Koshun},
  title = {Field Blast Tests and Finite Element Analysis of A36 Steel Sheets Subjected to High Explosives},
  journal = {Eng},
  year = {2025},
  volume = {6},
  number = {8},
  pages = {187},
  doi = {10.3390/eng6080187}
}
Kostenlos starten →