EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Behavior of Retained Austenite and Carbide Phases in AISI 440C Martensitic Stainless Steel under Cavitation

Silvio Francisco Brunatto, Rodrigo Perito Cardoso, Leonardo Luis Santos

Eng · 17.08.2024 · 5 (3) · 1980-1994

DOI: 10.3390/eng5030105 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Eng, online erschienen am 17.08.2024. Verfasst von Silvio Francisco Brunatto und 2 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Coordenação de Aperfeiçoamento de Pessoal de Nível Superior, CNPq (Conselho Nacional de Desenvolvimento Científico e Tecnológico), MCTI/CNPq/CTAquaviário.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this work emphasis was given to determine the evolution of the retained austenite phase fraction via X-ray diffractometry technique in the as-hardened AISI 440C martensitic stainless steel surface subjected to cavitation for increasing test times. Scanning electron microscopy results confirmed the preferential carbide phase removal along the prior/parent austenite grain boundaries for the first cavitation test times on the polished sample surface during the incubation period. Results suggest that the strain-induced martensitic transformation of the retained austenite would be assisted by the elastic deformation and intermittent relaxation action of the harder martensitic matrix on the austenite crystals through the interfaces between both phases. In addition, an estimation of the stacking fault energy value on the order of 15 mJ m−2 for the retained austenite phase made it possible to infer that mechanical twinning and strain-induced martensite formation mechanisms could be effectively presented in the studied case. Finally, incubation period, maximum erosion rate, and erosion resistance on the order of 7.0 h, 0.30 mg h−1, and 4.8 h μm−1, respectively, were determined for the as-hardened AISI 440C MSS samples investigated here.

Förderung

  • Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
  • CNPq (Conselho Nacional de Desenvolvimento Científico e Tecnológico)
  • MCTI/CNPq/CTAquaviário
  • Fundação Araucária

Zitieren

APA

Brunatto, S. F., Cardoso, R. P., & Santos, L. L. (2024). Behavior of Retained Austenite and Carbide Phases in AISI 440C Martensitic Stainless Steel under Cavitation. Eng, 5(3), 1980-1994. https://doi.org/10.3390/eng5030105

Vancouver

Brunatto SF, Cardoso RP, Santos LL. Behavior of Retained Austenite and Carbide Phases in AISI 440C Martensitic Stainless Steel under Cavitation. Eng. 2024;5(3):1980-1994. doi:10.3390/eng5030105

BibTeX
@article{Brunatto2024,
  author = {Brunatto, Silvio Francisco and Cardoso, Rodrigo Perito and Santos, Leonardo Luis},
  title = {Behavior of Retained Austenite and Carbide Phases in AISI 440C Martensitic Stainless Steel under Cavitation},
  journal = {Eng},
  year = {2024},
  volume = {5},
  number = {3},
  pages = {1980--1994},
  doi = {10.3390/eng5030105}
}
Kostenlos starten →