Machine Learning Study of the Effect of Process Parameters on Tensile Strength of FFF PLA and PLA-CF
Eng · 03.11.2023 · 4 (4) · 2741-2763
DOI: 10.3390/eng4040156 ↗Kurz gefasst
Fachartikel in der Zeitschrift Eng, online erschienen am 03.11.2023. Verfasst von Abdelhamid Ziadia und 2 weiteren Autor:innen. Die Arbeit wurde bisher 69-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Sciences and Engineering Research Council (NSERC) of Canada, Canada Research Chair Program.
Abstract (Originalsprache)
Material extrusion is a popular additive manufacturing technology due to its low cost, wide market availability, ability to construct complex parts, safety, and cleanliness. However, optimizing the process parameters to obtain the best possible mechanical properties has not been extensively studied. This paper aims to develop ensemble learning-based models to predict the ultimate tensile strength, Young’s modulus, and the strain at break of PLA and PLA-CF 3D-printed parts, using printing temperature, printing speed, and layer thickness as process parameters. Additionally, the study investigates the impact of process parameters and material selection on the mechanical properties of the printed parts and uses genetic algorithms for multi-objective optimization according to user specifications. The results indicate that process parameters and material selection significantly influence the mechanical properties of the printed parts. The ensemble learning predictive models yielded an R2 value of 91.75% for ultimate tensile strength, 94.08% for Young’s modulus, and 88.54% for strain at break. The genetic algorithm successfully identified optimal parameter values for the desired mechanical properties. For optimal ultimate tensile strength, PLA-CF was used at 222.28 °C, 0.261 mm layer, 40.30 mm/s speed, yielding 41.129 MPa. For Young’s modulus: 4423.63 MPa, PLA-CF, 200.01 °C, 0.388 mm layer, 40.38 mm/s. For strain at break: 2.249%, PLA, 200.34 °C, 0.390 mm layer, 45.30 mm/s. Moreover, this work is the first to model the process–structure property relationships for an additive manufacturing process and to use a multi-objective optimization approach for multiple mechanical properties, utilizing ensemble learning-based algorithms and genetic algorithms.
Förderung
- Natural Sciences and Engineering Research Council (NSERC) of Canada
- Canada Research Chair Program
Zitieren
APA
Ziadia, A., Habibi, M., & Kelouwani, S. (2023). Machine Learning Study of the Effect of Process Parameters on Tensile Strength of FFF PLA and PLA-CF. Eng, 4(4), 2741-2763. https://doi.org/10.3390/eng4040156
Vancouver
Ziadia A, Habibi M, Kelouwani S. Machine Learning Study of the Effect of Process Parameters on Tensile Strength of FFF PLA and PLA-CF. Eng. 2023;4(4):2741-2763. doi:10.3390/eng4040156
BibTeX
@article{Ziadia2023,
author = {Ziadia, Abdelhamid and Habibi, Mohamed and Kelouwani, Sousso},
title = {Machine Learning Study of the Effect of Process Parameters on Tensile Strength of FFF PLA and PLA-CF},
journal = {Eng},
year = {2023},
volume = {4},
number = {4},
pages = {2741--2763},
doi = {10.3390/eng4040156}
}
EUVIMED