Investigation of POE Filling Behaviour in Cell-Edge Gaps During Photovoltaic Module Lamination
Energies · 17.11.2026 · 19 (22) · 5555
DOI: 10.3390/en19225555 ↗Kurz gefasst
Fachartikel in der Zeitschrift Energies, online erschienen am 17.11.2026. Verfasst von Junhe Zhou und 3 weiteren Autor:innen. Die Arbeit nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: “Pioneer” and “Leading Goose” R&D Program of Zhejiang.
Abstract (Originalsprache)
During the lamination process of photovoltaic module stacks, the filling of gaps along solar cell edges by the encapsulant film affects local encapsulation quality. As the polyolefin elastomer (POE) film softens with heating, pressing drives it into these gaps. The resulting filling depends on the pressing conditions. However, the impact of pressing parameters on the average filling rate and coverage at different edge locations remain unclear. This study employed a three-dimensional transient numerical model to examine the effects of pressing duration, displacement, and velocity profile on POE gap filling. With a displacement of 12 μm per glass layer, the 200 s case achieved the highest filling rate among the durations examined, reaching 85.84%. Extending pressing beyond 200 s did not improve the overall filling fraction. Increasing the displacement primarily improved filling beneath the short edge and at the outer edge of the gap, although the gain diminished at larger displacements. At the same displacement and duration, the half-sinusoidal velocity profile produced a higher filling rate than the early-slow profile. These results inform the selection of lamination parameters for double-glass photovoltaic module stacks with ultrathin silicon cells and provide an approach for evaluating gap filling across different cell and POE film dimensions.
Förderung
- “Pioneer” and “Leading Goose” R&D Program of Zhejiang
Zitieren
APA
Zhou, J., Zhu, P., Xie, X., & Xiao, G. (2026). Investigation of POE Filling Behaviour in Cell-Edge Gaps During Photovoltaic Module Lamination. Energies, 19(22), 5555. https://doi.org/10.3390/en19225555
Vancouver
Zhou J, Zhu P, Xie X, Xiao G. Investigation of POE Filling Behaviour in Cell-Edge Gaps During Photovoltaic Module Lamination. Energies. 2026;19(22):5555. doi:10.3390/en19225555
BibTeX
@article{Zhou2026,
author = {Zhou, Junhe and Zhu, Peiwang and Xie, Xiangyu and Xiao, Gang},
title = {Investigation of POE Filling Behaviour in Cell-Edge Gaps During Photovoltaic Module Lamination},
journal = {Energies},
year = {2026},
volume = {19},
number = {22},
pages = {5555},
doi = {10.3390/en19225555}
}
EUVIMED