EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and Experimental Validation of a Three-Port Unidirectional Isolated DC–DC Converter with Dual Outputs

Menaouar Berrehil El Kattel, Robson Mayer, Lincoln Moura de Oliveira, Reuber Saraiva de Santiago, Cristina do Carmo Lucio Berrehil El Kattel, Benameur Berrehil El Kattel, Telles Brunelli Lazzarin, Luiz Henrique Silva Colado Barreto, Braz de Jesus Cardoso Filho

Energies · 13.11.2026 · 19 (22) · 5474

DOI: 10.3390/en19225474 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 13.11.2026. Verfasst von Menaouar Berrehil El Kattel und 8 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: FUNCAP/SECITECE, CNPq.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents a three-port unidirectional isolated DC–DC converter for high-power applications, featuring two isolated output ports supplied by a single input source. The proposed topology integrates a full-bridge switching stage, a high-frequency transformer with two secondary windings, and independent rectification stages to provide two output voltages. The converter operating principle is analyzed through its main switching stages, and closed-form expressions are derived for the DC voltage gains, inductor design, capacitor design, and voltage and current stresses of the main semiconductor and passive components. In addition, a parameterized expression for the input inductor current ripple is obtained, showing complete ripple cancellation at a duty cycle of 0.5 and identifying the operating points associated with the maximum ripple. A 7.5 kW laboratory prototype with a 260 V input voltage and 800 V and 400 V output ports was developed to experimentally validate the proposed analysis. The experimental results show good agreement with the theoretical prediction. The converter achieves a maximum measured efficiency of 96.81% at approximately 4.5 kW and maintains an efficiency above 96.5% from approximately 3.5 to 7 kW. These results demonstrate the feasibility of the proposed three-port isolated converter for high-power applications.

Förderung

  • FUNCAP/SECITECE
  • CNPq

Zitieren

APA

Kattel, M. B. E., Mayer, R., Oliveira, L. M. D., Santiago, R. S. D., Kattel, C. D. C. L. B. E., Kattel, B. B. E., Lazzarin, T. B., Barreto, L. H. S. C., & Filho, B. D. J. C. (2026). Design and Experimental Validation of a Three-Port Unidirectional Isolated DC–DC Converter with Dual Outputs. Energies, 19(22), 5474. https://doi.org/10.3390/en19225474

Vancouver

Kattel MBE, Mayer R, Oliveira LMD, Santiago RSD, Kattel CDCLBE, Kattel BBE, et al. Design and Experimental Validation of a Three-Port Unidirectional Isolated DC–DC Converter with Dual Outputs. Energies. 2026;19(22):5474. doi:10.3390/en19225474

BibTeX
@article{Kattel2026,
  author = {Kattel, Menaouar Berrehil El and Mayer, Robson and Oliveira, Lincoln Moura de and Santiago, Reuber Saraiva de and Kattel, Cristina do Carmo Lucio Berrehil El and Kattel, Benameur Berrehil El and Lazzarin, Telles Brunelli and Barreto, Luiz Henrique Silva Colado and Filho, Braz de Jesus Cardoso},
  title = {Design and Experimental Validation of a Three-Port Unidirectional Isolated DC–DC Converter with Dual Outputs},
  journal = {Energies},
  year = {2026},
  volume = {19},
  number = {22},
  pages = {5474},
  doi = {10.3390/en19225474}
}
Kostenlos starten →