EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Application of the Internet of Things in Wind Energy—Validation of Wind Turbine Power Models Using Open SCADA Data

Patryk Mirosław Radek, Kinga Konieczna, Hanna Syrotyuk, Serhiy Syrotyuk, Vadym Ptashnyk, Vladyslav Klymchuk, Taras Stanytskyy, Alla Zhelyeznyak, Illia Dudko, Kamila Klimek, Zbigniew Jarosz, Magdalena Kapłan und 2 weitere

Energies · 01.11.2026 · 19 (21) · 5201

DOI: 10.3390/en19215201 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 01.11.2026. Verfasst von Patryk Mirosław Radek und 13 weiteren Autor:innen. Die Arbeit nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Life Science, Lublin, Poland.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The article asks the following questions: what is the Internet of Things, how do wind farms operate, and why is it worth integrating the IoT with renewable energy? It highlights the monitoring of wind turbine operating parameters, process automation and optimization, and failure prediction and predictive maintenance. Examples of wind farm systems utilizing the Internet of Things, as well as technologies and platforms used in monitoring, are presented. By identifying the challenges and limitations of data management, the future of the Internet of Things in wind energy is outlined. A secondary analysis of measurements from the Kelmarsh turbine illustrates machine learning in the analytical layer of an IoT system. The study assesses whether a power model selected using earlier data retains an advantage over a simple empirical power curve in a later operating period. The results highlight temporal validation, large-error assessment, and interval coverage monitoring. The calculations estimate power within the same measurement interval and do not forecast future production. In the calculations presented, the anticipated input signals and the recorded power output are derived from the same 10 min interval. The estimate is generated only after the measurements for this interval become available. No forecast horizon is defined; therefore, this analysis does not constitute a prediction of future production, nor does it demonstrate an ability to anticipate faults. To make claims regarding predictive maintenance, one would require verified records of failures or service interventions, information on operational constraints and states, diagnostic signals (e.g., vibration, component temperatures, gearbox parameters) along with their historical trends, and an evaluation of the lead time and classification error rates based on an independent dataset.

Förderung

  • University of Life Science, Lublin, Poland

Zitieren

APA

Radek, P. M., Konieczna, K., Syrotyuk, H., Syrotyuk, S., Ptashnyk, V., Klymchuk, V., Stanytskyy, T., Zhelyeznyak, A., Dudko, I., Klimek, K., Jarosz, Z., Kapłan, M., Dybek, B., & Wałowski, G. (2026). Application of the Internet of Things in Wind Energy—Validation of Wind Turbine Power Models Using Open SCADA Data. Energies, 19(21), 5201. https://doi.org/10.3390/en19215201

Vancouver

Radek PM, Konieczna K, Syrotyuk H, Syrotyuk S, Ptashnyk V, Klymchuk V, et al. Application of the Internet of Things in Wind Energy—Validation of Wind Turbine Power Models Using Open SCADA Data. Energies. 2026;19(21):5201. doi:10.3390/en19215201

BibTeX
@article{Radek2026,
  author = {Radek, Patryk Mirosław and Konieczna, Kinga and Syrotyuk, Hanna and Syrotyuk, Serhiy and Ptashnyk, Vadym and Klymchuk, Vladyslav and Stanytskyy, Taras and Zhelyeznyak, Alla and Dudko, Illia and Klimek, Kamila and Jarosz, Zbigniew and Kapłan, Magdalena and Dybek, Barbara and Wałowski, Grzegorz},
  title = {Application of the Internet of Things in Wind Energy—Validation of Wind Turbine Power Models Using Open SCADA Data},
  journal = {Energies},
  year = {2026},
  volume = {19},
  number = {21},
  pages = {5201},
  doi = {10.3390/en19215201}
}
Kostenlos starten →