Artificial Neural Network Surrogate for Entropy Generation Analysis in PCM-Based Thermal Energy Storage
Energies · 30.10.2026 · 19 (21) · 5164
DOI: 10.3390/en19215164 ↗Kurz gefasst
Fachartikel in der Zeitschrift Energies, online erschienen am 30.10.2026. Verfasst von Łukasz Łach. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education, AGH University IDUB program.
Abstract (Originalsprache)
Latent heat thermal energy storage (LHTES) systems based on phase change materials (PCMs) are central to improving energy efficiency in solar–thermal, waste-heat recovery, and building energy management applications; however, minimizing the thermodynamic losses that degrade their exergetic performance requires fast and accurate prediction of entropy generation across wide operating envelopes. This study develops a coupled numerical–surrogate framework for predicting entropy generation during one-dimensional conduction-dominated melting of a PCM slab. An explicit finite-difference enthalpy solver is formulated in fully dimensionless variables governed by five independent parameters: the Stefan number (Ste), Biot number (Bi), initial subcooling (θi), dimensionless temperature difference (Π), and solid-to-liquid conductivity ratio (rk). The solver is verified against the analytical Neumann solution, achieving mean front-position errors below 0.7%. A Latin Hypercube Sampling campaign of 400 parameter combinations yields 378 converged cases spanning nearly three orders of magnitude in the entropy generation number Ns. A compact multilayer perceptron (5→64→64→32→1; 6657 parameters) trained on these data reproduces Ns with a test-set coefficient of determination R2=0.991 and a mean absolute percentage error of 5.73% while delivering a speed-up of approximately four orders of magnitude over the full solver. A global sensitivity analysis reveals that the dimensionless temperature difference Π is the dominant driver of entropy generation (Spearman ρ=+0.80), followed by the Stefan number (ρ=−0.51) and the Biot number (ρ=+0.25), whereas initial subcooling and conductivity ratio exert only marginal influence. The framework enables rapid, second-law-aware screening of PCM operating conditions, supporting energy-efficient design and optimization of thermal energy storage systems.
Förderung
- Ministry of Science and Higher Education
- AGH University IDUB program
Zitieren
APA
Łach, Ł. (2026). Artificial Neural Network Surrogate for Entropy Generation Analysis in PCM-Based Thermal Energy Storage. Energies, 19(21), 5164. https://doi.org/10.3390/en19215164
Vancouver
Łach Ł. Artificial Neural Network Surrogate for Entropy Generation Analysis in PCM-Based Thermal Energy Storage. Energies. 2026;19(21):5164. doi:10.3390/en19215164
BibTeX
@article{ach2026,
author = {Łach, Łukasz},
title = {Artificial Neural Network Surrogate for Entropy Generation Analysis in PCM-Based Thermal Energy Storage},
journal = {Energies},
year = {2026},
volume = {19},
number = {21},
pages = {5164},
doi = {10.3390/en19215164}
}
EUVIMED