Geometrical Effects of Flow Reversers on the Thermo-Hydraulic Performance of a Rotating Horizontal Spiral Heat Exchanger
Energies · 20.08.2026 · 19 (16) · 3919
DOI: 10.3390/en19163919 ↗Kurz gefasst
Fachartikel in der Zeitschrift Energies, online erschienen am 20.08.2026. Verfasst von Mohammad Mobin Bakhshi und 5 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Florida State University.
Abstract (Originalsprache)
This research numerically evaluates the effects of various geometric parameters on the optimization of flow reversers on a rotating spiral heat exchanger utilizing computational fluid dynamics. There were three important geometric parameters investigated to find their impact on thermo-hydraulic characteristics: (i) distribution frequency of reversers along the spiral channel, (ii) reverser turn diameter, and (iii) reverser tube diameter. Thermo-hydraulic characteristics of the proposed designs were studied according to the velocity and temperature distributions, average Nusselt number, pressure drop, and performance evaluation criterion. From all the evaluated designs, the reduction in reverser tube diameter resulted in the most desirable performance as the average Nusselt number increased about 44.6% while the pressure drop increased merely by 10% compared to the base design. Thus, the obtained design gave the best performance evaluation criterion of around 1.77. Decrease in reverser turn diameter led to an increase in Nusselt number about 6.3%, although with 40% increase in pressure drop, resulting in the worst performance evaluation criterion of approximately 1.20. Overall, the results show that proper geometric optimization of flow reversers is able to noticeably enhance the thermo-hydraulic performance of the heat exchangers.
Förderung
- Florida State University
Zitieren
APA
Bakhshi, M. M., Ahangar, F., Abbaspour, M., Wu, H., Anand, A., & Ramakrishna, G. D. (2026). Geometrical Effects of Flow Reversers on the Thermo-Hydraulic Performance of a Rotating Horizontal Spiral Heat Exchanger. Energies, 19(16), 3919. https://doi.org/10.3390/en19163919
Vancouver
Bakhshi MM, Ahangar F, Abbaspour M, Wu H, Anand A, Ramakrishna GD. Geometrical Effects of Flow Reversers on the Thermo-Hydraulic Performance of a Rotating Horizontal Spiral Heat Exchanger. Energies. 2026;19(16):3919. doi:10.3390/en19163919
BibTeX
@article{Bakhshi2026,
author = {Bakhshi, Mohammad Mobin and Ahangar, Faezeh and Abbaspour, Mohammadreza and Wu, Huixuan and Anand, Akshay and Ramakrishna, Ganesh Desai},
title = {Geometrical Effects of Flow Reversers on the Thermo-Hydraulic Performance of a Rotating Horizontal Spiral Heat Exchanger},
journal = {Energies},
year = {2026},
volume = {19},
number = {16},
pages = {3919},
doi = {10.3390/en19163919}
}
EUVIMED