EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermo-Hydro-Mechanical Modeling of Geothermal Energy Extraction Using Water and Pressurized CO2 in Deep Reservoir Systems

Donghuan Han, Yan Xia, Xiangyang Wang, Fansheng Ban, Xiaoxuan Li, Haoyu Diao, Yueyang Guan, Yonghan Liu, Feifei Fang, Jie Zhang

Energies · 28.07.2026 · 19 (15) · 3545

DOI: 10.3390/en19153545 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 28.07.2026. Verfasst von Donghuan Han und 9 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Major Science and Technology Project on Deep Earth Exploration, Research on High-efficiency Drilling and Completion Technology for Deep High-temperature Geothermal Resources, Science and Technology Project of China National Petroleum Corporation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Geothermal energy extraction using existing wellbore systems provides a promising approach for sustainable heat utilization; however, the long-term thermo-hydro-mechanical (THM) responses associated with different working fluids remain insufficiently understood. In this study, a three-dimensional coupled THM model was developed to compare geothermal heat extraction using water and pressurized CO2 under identical geological and operational conditions. The model integrates Darcy flow, heat transfer, and linear elastic deformation to investigate the evolution of hydraulic, thermal, and mechanical fields over a 100-year operation period. The results show that the hydraulic fields rapidly reach quasi-steady states, whereas thermal responses continuously evolve due to cold-front propagation from the injection well. Compared with water, pressurized CO2 exhibits stronger fluid mobility and produces a larger thermal influence region, resulting in different heat extraction characteristics under the same mass-flow-rate condition. Thermal cooling induces reservoir contraction and stress redistribution; however, the calculated stress and displacement variations remain within a stable range throughout the simulation period. The comparison demonstrates that pressurized CO2 can enhance long-term thermal utilization while maintaining acceptable geomechanical stability under the investigated conditions. These findings provide insights into the selection of working fluids for wellbore-based geothermal systems and highlight the importance of coupled THM evaluation for long-term reservoir performance assessment.

Förderung

  • National Major Science and Technology Project on Deep Earth Exploration
  • Research on High-efficiency Drilling and Completion Technology for Deep High-temperature Geothermal Resources
  • Science and Technology Project of China National Petroleum Corporation

Zitieren

APA

Han, D., Xia, Y., Wang, X., Ban, F., Li, X., Diao, H., Guan, Y., Liu, Y., Fang, F., & Zhang, J. (2026). Thermo-Hydro-Mechanical Modeling of Geothermal Energy Extraction Using Water and Pressurized CO2 in Deep Reservoir Systems. Energies, 19(15), 3545. https://doi.org/10.3390/en19153545

Vancouver

Han D, Xia Y, Wang X, Ban F, Li X, Diao H, et al. Thermo-Hydro-Mechanical Modeling of Geothermal Energy Extraction Using Water and Pressurized CO2 in Deep Reservoir Systems. Energies. 2026;19(15):3545. doi:10.3390/en19153545

BibTeX
@article{Han2026,
  author = {Han, Donghuan and Xia, Yan and Wang, Xiangyang and Ban, Fansheng and Li, Xiaoxuan and Diao, Haoyu and Guan, Yueyang and Liu, Yonghan and Fang, Feifei and Zhang, Jie},
  title = {Thermo-Hydro-Mechanical Modeling of Geothermal Energy Extraction Using Water and Pressurized CO2 in Deep Reservoir Systems},
  journal = {Energies},
  year = {2026},
  volume = {19},
  number = {15},
  pages = {3545},
  doi = {10.3390/en19153545}
}
Kostenlos starten →