EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and Optimization of Bottom-Hole Temperature–Pressure Combinations in Gas Production from Gas Hydrates via Carbon Dioxide Replacement Strategy

Jingjuan Wu, Qiang Li, Qingchao Li, Fuling Wang, Yuanfang Cheng, Chuanliang Yan

Energies · 27.07.2026 · 19 (15) · 3536

DOI: 10.3390/en19153536 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 27.07.2026. Verfasst von Jingjuan Wu und 5 weiteren Autor:innen. Die Arbeit wurde bisher 48-mal zitiert (Crossref) und nennt 130 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Carbon dioxide replacement represents a promising hydrate development strategy that effectively balances production efficiency and environmental considerations. However, its production efficiency is lower than that of the depressurization strategy. This limitation can be effectively alleviated by coupling carbon dioxide replacement with inhibitor injection. The design and optimization of the temperature–pressure operating window constrain its effective implementation. In the present work, the phase equilibrium conditions of carbon dioxide hydrate and methane hydrate were experimentally investigated. It was found that the experimental values obtained in this study are in excellent agreement with those calculated by the CSMHyd program. The average absolute relative deviations (AARD) for the experimental versus calculated results are 5.77% for methane hydrate and 2.66% for carbon dioxide hydrate. Then, the methodology for determining the recommended temperature–pressure combinations used in the carbon dioxide replacement strategy was proposed, and the size of region in which these combinations occur was quantified. The investigation results found that there are significant differences in the size of the recommended region for different sea areas, and inhibitor injection reduces the size of this recommended region. Injection of 3.0 wt% NaCl solution reduces the size of recommended region from 10.968 K·MPa to 8.366 K·MPa for pure methane hydrate, and a similar trend is also observed for natural gas hydrates. Based on the experimental results, the carbon sequestration potential of natural gas hydrate development using the carbon dioxide replacement strategy on core size was analyzed. The final simulation results show that 9.05 mol of carbon dioxide hydrate was obtained in the reaction vessel, which achieves effective CO2 sequestration. The investigation in this work provides theoretical support for dual goals of carbon sequestration and efficient gas production from gas hydrates.

Zitieren

APA

Wu, J., Li, Q., Li, Q., Wang, F., Cheng, Y., & Yan, C. (2026). Design and Optimization of Bottom-Hole Temperature–Pressure Combinations in Gas Production from Gas Hydrates via Carbon Dioxide Replacement Strategy. Energies, 19(15), 3536. https://doi.org/10.3390/en19153536

Vancouver

Wu J, Li Q, Li Q, Wang F, Cheng Y, Yan C. Design and Optimization of Bottom-Hole Temperature–Pressure Combinations in Gas Production from Gas Hydrates via Carbon Dioxide Replacement Strategy. Energies. 2026;19(15):3536. doi:10.3390/en19153536

BibTeX
@article{Wu2026,
  author = {Wu, Jingjuan and Li, Qiang and Li, Qingchao and Wang, Fuling and Cheng, Yuanfang and Yan, Chuanliang},
  title = {Design and Optimization of Bottom-Hole Temperature–Pressure Combinations in Gas Production from Gas Hydrates via Carbon Dioxide Replacement Strategy},
  journal = {Energies},
  year = {2026},
  volume = {19},
  number = {15},
  pages = {3536},
  doi = {10.3390/en19153536}
}
Kostenlos starten →