Heat Transfer Performance of a Multi-Branch Well System for In-Situ Conversion of Steeply Dipping Oil Shale Reservoirs
Energies · 23.07.2026 · 19 (15) · 3473
DOI: 10.3390/en19153473 ↗Kurz gefasst
Fachartikel in der Zeitschrift Energies, online erschienen am 23.07.2026. Verfasst von Xingyu Liu und 4 weiteren Autor:innen. Die Arbeit nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program of China, Key R & D and promotion projects in Henan Province.
Abstract (Originalsprache)
Efficient heat transfer is essential for the in-situ conversion of steeply dipping oil shale reservoirs. In this study, a superheated steam-driven integrated multi-branch well system was proposed, and a coupled thermo-hydro-chemical-mass transport model considering reservoir anisotropy was established in COMSOL Multiphysics-5.6 to investigate heat transfer characteristics and evaluate the effects of key engineering parameters. The numerical model was validated through comparison with an analytical solution and previously published numerical results. The results show that superheated steam preferentially migrates through hydraulic fractures and bedding-parallel high-permeability pathways, resulting in anisotropic heat transfer. Continuous steam injection gradually forms a connected high-temperature region, and most of the reservoir exceeds 500 °C after approximately 600 days. Compared with the conventional well arrangement, the proposed well system achieves more uniform reservoir heating and enlarges the effective pyrolysis region. Parametric analysis indicates that the highest thermal performance among the investigated cases is obtained with a heating well length of 22.5 m, while increasing the inter-well angle, fracture number, and fracture width enhances heat transfer and kerogen conversion. Among the investigated cases, the configuration with three hydraulic fractures achieves the best performance, with the high-temperature region (>500 °C) exceeding 80% of the reservoir after 400 days and a cumulative hydrocarbon production of approximately 4.7 × 107 mol. Sensitivity analysis further demonstrates that fracture-related parameters exert a greater influence on reservoir thermal performance than heating well length and inter-well angle. These findings provide theoretical guidance for the design and performance evaluation of integrated multi-branch well systems for the efficient in-situ conversion of steeply dipping oil shale reservoirs.
Förderung
- National Natural Science Foundation of China
- National Key Research and Development Program of China
- Key R & D and promotion projects in Henan Province
- Henan Provincial Science and Technology Research Project
- Research Project on Experimental Teaching and Teaching Laboratory Construction of the Ministry of Education
Zitieren
APA
Liu, X., Wang, G., Du, J., Zhang, H., & Fan, Q. (2026). Heat Transfer Performance of a Multi-Branch Well System for In-Situ Conversion of Steeply Dipping Oil Shale Reservoirs. Energies, 19(15), 3473. https://doi.org/10.3390/en19153473
Vancouver
Liu X, Wang G, Du J, Zhang H, Fan Q. Heat Transfer Performance of a Multi-Branch Well System for In-Situ Conversion of Steeply Dipping Oil Shale Reservoirs. Energies. 2026;19(15):3473. doi:10.3390/en19153473
BibTeX
@article{Liu2026,
author = {Liu, Xingyu and Wang, Guoying and Du, Jingtao and Zhang, Huidong and Fan, Qi},
title = {Heat Transfer Performance of a Multi-Branch Well System for In-Situ Conversion of Steeply Dipping Oil Shale Reservoirs},
journal = {Energies},
year = {2026},
volume = {19},
number = {15},
pages = {3473},
doi = {10.3390/en19153473}
}
EUVIMED