EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Two-Phase Flow Distribution in Plate Heat Exchangers Using a Coupled CFD–Distributed Parameter Model

Lin He, Zhipeng Ye, Shunan Zhao, Qing Luo, Bin Li, Zhichun Liu

Energies · 07.07.2026 · 19 (13) · 3215

DOI: 10.3390/en19133215 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 07.07.2026. Verfasst von Lin He und 5 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Zhuhai Fudan Innovation Research Institute, National Key Research and Development Program of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Plate heat exchangers (PHEs) play a critical role in the energy efficiency of heat pump systems. However, non-uniform two-phase flow distribution across parallel channels remains a key limitation, as it may cause local dryout and degrade heat transfer performance. To address the limitations of existing prediction approaches, a hybrid modeling framework coupling computational fluid dynamics (CFD) simulations with a distributed parameter model is developed. The model is validated against experimental data under 12 representative operating conditions. The results show that the average prediction errors for the total mass flow rate, pressure drop, and heat transfer rate are within 3%, ±10%, and ±5%, respectively. The influences of refrigerant outlet conditions and inlet distributor geometry on flow distribution uniformity are systematically investigated, identifying the dominant factors governing pressure drop and the mechanism by which distributor orientation improves uniformity. Quantitative optimization shows that an orifice orientation of 225° reduces flow non-uniformity by 67.8% and enhances the heat transfer rate by 4.33% compared with the distributor-free design. The proposed method is robust across various operating scenarios and provides a reliable, quantitative tool for optimizing PHE inlet distributor designs.

Förderung

  • Zhuhai Fudan Innovation Research Institute
  • National Key Research and Development Program of China

Zitieren

APA

He, L., Ye, Z., Zhao, S., Luo, Q., Li, B., & Liu, Z. (2026). Two-Phase Flow Distribution in Plate Heat Exchangers Using a Coupled CFD–Distributed Parameter Model. Energies, 19(13), 3215. https://doi.org/10.3390/en19133215

Vancouver

He L, Ye Z, Zhao S, Luo Q, Li B, Liu Z. Two-Phase Flow Distribution in Plate Heat Exchangers Using a Coupled CFD–Distributed Parameter Model. Energies. 2026;19(13):3215. doi:10.3390/en19133215

BibTeX
@article{He2026,
  author = {He, Lin and Ye, Zhipeng and Zhao, Shunan and Luo, Qing and Li, Bin and Liu, Zhichun},
  title = {Two-Phase Flow Distribution in Plate Heat Exchangers Using a Coupled CFD–Distributed Parameter Model},
  journal = {Energies},
  year = {2026},
  volume = {19},
  number = {13},
  pages = {3215},
  doi = {10.3390/en19133215}
}
Kostenlos starten →