EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Performance Evaluation of a Packed Bed Latent Thermal Storage System Using Superellipsoidal PCM Capsules

Matti Grabo, Lennart Kuckuck, Eugeny Y. Kenig

Energies · 02.07.2026 · 19 (13) · 3138

DOI: 10.3390/en19133138 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 02.07.2026. Verfasst von Matti Grabo und 2 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: German Federal Ministry for Economic Affairs and Energy.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Two crucial yet opposing design criteria govern the performance of packed bed latent thermal energy storage systems (PBLTESS): energy storage capacity and thermal power. While the former depends on the packing density of the phase change material (PCM) capsules forming the packed bed, the latter is influenced by the surface-area-to-volume ratio (SVR) of these capsules. This study introduces novel superellipsoidal geometries for PCM capsules to address both these factors and quantifies the impact of design parameters on both mentioned performance criteria. First, by using discrete element method (DEM) simulations, we performed virtual bed filling experiments and generated packed beds from 116 superellipsoidal designs with similar volume. These simulations revealed a maximum packing density of 65.2%—significantly higher than conventional spherical capsule designs. Validation through bed filling experiments using 3D-printed superellipsoids confirmed the results of the DEM simulations, with an average deviation of less than 5%. Additionally, the SVR of each superellipsoidal design was determined through CAD analyses. Subsequently, six superellipsoidal designs as well as a spherical design were selected for further investigation using a 1D PBLTESS model to simulate charging and discharging. With up to 85% higher storage capacity (due to increased packing density) and up to 50% higher thermal power (resulting from enhanced heat transfer), the superellipsoidal geometries clearly outperformed the spherical design.

Förderung

  • German Federal Ministry for Economic Affairs and Energy

Zitieren

APA

Grabo, M., Kuckuck, L., & Kenig, E. Y. (2026). Performance Evaluation of a Packed Bed Latent Thermal Storage System Using Superellipsoidal PCM Capsules. Energies, 19(13), 3138. https://doi.org/10.3390/en19133138

Vancouver

Grabo M, Kuckuck L, Kenig EY. Performance Evaluation of a Packed Bed Latent Thermal Storage System Using Superellipsoidal PCM Capsules. Energies. 2026;19(13):3138. doi:10.3390/en19133138

BibTeX
@article{Grabo2026,
  author = {Grabo, Matti and Kuckuck, Lennart and Kenig, Eugeny Y.},
  title = {Performance Evaluation of a Packed Bed Latent Thermal Storage System Using Superellipsoidal PCM Capsules},
  journal = {Energies},
  year = {2026},
  volume = {19},
  number = {13},
  pages = {3138},
  doi = {10.3390/en19133138}
}
Kostenlos starten →