Energy-Efficient Thermal Management of a Fuel-Cell Heavy-Duty Truck via Nonlinear Model Predictive Control
Energies · 01.07.2026 · 19 (13) · 3123
DOI: 10.3390/en19133123 ↗Kurz gefasst
Fachartikel in der Zeitschrift Energies, online erschienen am 01.07.2026. Verfasst von Tarik Hadzovic und 6 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Federal Ministry of Transport.
Abstract (Originalsprache)
A methodology for the development of nonlinear model predictive control for thermal management of a 40-ton fuel-cell heavy-duty truck is presented, using the medium-temperature cooling circuit as a case study. The approach integrates control-oriented modeling, parameter estimation, and experimental validation based on drivetrain test bench measurements under controlled high-temperature ambient conditions. A lumped-parameter model of the medium-temperature circuit, including coolant, oil, electric motors, and power-electronics auxiliaries, is derived and implemented in a Simulink environment, with heat-transfer parameters calibrated from test bench data and radiator air-side resistance and fan characteristics derived from CFD simulations and manufacturer specifications, respectively. Model parameters are identified using a systematic estimation procedure and the resulting model is validated against long-duration roller test measurements, achieving coefficients of determination above R2 = 0.9 and normalized RMSE values below 10% for all key temperatures. The validated model is then used as the prediction model in a model predictive controller that manipulates radiator fan and coolant-pump speeds, while treating component heat losses, vehicle speed and ambient temperature as measured disturbances. The controller is evaluated in a model-in-the-loop environment for representative long-haul and urban driving cycles and different ambient temperatures, and its performance is benchmarked against conventional rule-based and PI-based control strategies. Depending on the driving cycle and ambient conditions, the proposed NMPC reduces cooling system energy consumption by up to 39.6% compared to a PI controller (VECTO Urban Delivery cycle, 35 °C ambient), with an average reduction of 16.6% across all investigated driving cycles and ambient conditions, without a significant increase in average or maximum coolant temperature. The proposed methodology provides a transferable workflow for developing predictive thermal management control in fuel-cell heavy-duty vehicles and other complex automotive cooling systems.
Förderung
- Federal Ministry of Transport
Zitieren
APA
Hadzovic, T., Mei, C., Bayerlein, M., Kisseler, N., Hausmann, J., Heimes, H., & Kampker, A. (2026). Energy-Efficient Thermal Management of a Fuel-Cell Heavy-Duty Truck via Nonlinear Model Predictive Control. Energies, 19(13), 3123. https://doi.org/10.3390/en19133123
Vancouver
Hadzovic T, Mei C, Bayerlein M, Kisseler N, Hausmann J, Heimes H, et al. Energy-Efficient Thermal Management of a Fuel-Cell Heavy-Duty Truck via Nonlinear Model Predictive Control. Energies. 2026;19(13):3123. doi:10.3390/en19133123
BibTeX
@article{Hadzovic2026,
author = {Hadzovic, Tarik and Mei, Changying and Bayerlein, Maximilian and Kisseler, Niklas and Hausmann, Julius and Heimes, Heiner and Kampker, Achim},
title = {Energy-Efficient Thermal Management of a Fuel-Cell Heavy-Duty Truck via Nonlinear Model Predictive Control},
journal = {Energies},
year = {2026},
volume = {19},
number = {13},
pages = {3123},
doi = {10.3390/en19133123}
}
EUVIMED