EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

CFD Modeling as an IT-Support Tool for NOx Emission Reduction at Coal-Fired Thermal Power Plants

Symbat Bolegenova, Aliya Askarova, Saltanat Bolegenova, Aizhan Nugymanova, Valeriy Maximov, Nariman Askarov, Shynar Ospanova

Energies · 29.06.2026 · 19 (13) · 3083

DOI: 10.3390/en19133083 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 29.06.2026. Verfasst von Symbat Bolegenova und 6 weiteren Autor:innen. Die Arbeit nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education and Science of the Republic of Kazakhstan.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In recent years, a sharp increase in coal-based power generation has been observed in a number of countries. Coal-fired thermal power plants remain the main source of harmful emissions in the energy sector of many countries, including Kazakhstan. This creates a strong need for the development of effective methods to reduce pollutant emissions at thermal power plants. The aim of the present study is to perform a numerical investigation of the effectiveness of staged combustion technology with secondary air injection (Over-Fire Air, OFA) applied to three boilers—PK-39, BKZ-160, and BKZ-75—which differ in design, capacity, and furnace configuration. CFD modeling was carried out using the FLOREAN package, adapted to the conditions of the Kazakh energy sector, which relies on high-ash coal (more than 40%) for coal-based power generation. Model validation was performed against experimental data obtained from operating thermal power plants. It was found that air injection through OFA injectors intensifies turbulent mixing, reduces peak temperatures in the main combustion zone, and ensures a more uniform distribution of heat release along the furnace height, thereby suppressing thermal NOx formation. It is shown that the spatial structure of NO concentration fields at the furnace outlet strongly depends on the design features of each boiler. The results demonstrate the high efficiency of staged combustion technology in reducing nitrogen oxide emissions and improving the environmental performance of pulverized-coal boiler units. The obtained results can be used in the design of new and the modernization of existing thermal power plants utilizing coal-based power generation.

Förderung

  • Ministry of Education and Science of the Republic of Kazakhstan

Zitieren

APA

Bolegenova, S., Askarova, A., Bolegenova, S., Nugymanova, A., Maximov, V., Askarov, N., & Ospanova, S. (2026). CFD Modeling as an IT-Support Tool for NOx Emission Reduction at Coal-Fired Thermal Power Plants. Energies, 19(13), 3083. https://doi.org/10.3390/en19133083

Vancouver

Bolegenova S, Askarova A, Bolegenova S, Nugymanova A, Maximov V, Askarov N, et al. CFD Modeling as an IT-Support Tool for NOx Emission Reduction at Coal-Fired Thermal Power Plants. Energies. 2026;19(13):3083. doi:10.3390/en19133083

BibTeX
@article{Bolegenova2026,
  author = {Bolegenova, Symbat and Askarova, Aliya and Bolegenova, Saltanat and Nugymanova, Aizhan and Maximov, Valeriy and Askarov, Nariman and Ospanova, Shynar},
  title = {CFD Modeling as an IT-Support Tool for NOx Emission Reduction at Coal-Fired Thermal Power Plants},
  journal = {Energies},
  year = {2026},
  volume = {19},
  number = {13},
  pages = {3083},
  doi = {10.3390/en19133083}
}
Kostenlos starten →