Transient Numerical Study of Heat Extraction in Heat Sinks with Sinusoidal Fins Using Perforations
Energies · 29.06.2026 · 19 (13) · 3079
DOI: 10.3390/en19133079 ↗Kurz gefasst
Fachartikel in der Zeitschrift Energies, online erschienen am 29.06.2026. Verfasst von Fernando Toapanta-Ramos und 3 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The increasing power density of modern electronics demands more efficient thermal management. Heat sinks with sinusoidal fins remain understudied, and the combined effect of perforations and variable fin spacing on transient performance has not been systematically quantified. This numerical study, conducted using ANSYS Fluent 2025 R2, analyzes three sinusoidal fin configurations under forced convection (3–5 m/s): solid fins (Case A), perforated fins (Case B), and perforated fins with alternating spacing of 2 mm and 4.5 mm (Case C). The base was maintained at 60 °C during a 20 s transient period. A mesh with an average skewness of less than 0.25 ensured numerical convergence. Case B showed remarkable uniformity in the base temperature (variations < 1 °C), in contrast to Case A (variations of up to 14.17 °C), due to a thermal boundary layer restart effect induced by the perforations. Case C reached the highest heat dissipation temperatures (up to 54.64 °C at 3 m/s), representing a 47.2% increase compared to Case A, indicating more effective heat extraction with this type of separate fin. The critical transient window occurs within the first 5 s (>85% of the total temperature rise). A vertical temperature gradient of 1.19 °C/mm was observed near the base. Although the perforations reduced the heat transfer area by 5.94%, the induced turbulence compensated for this loss. Sinusoidal fins with perforations and variable spacing significantly improve convective heat removal.
Zitieren
APA
Toapanta-Ramos, F., Ortega-Loza, F., Erazo, J., & Diaz, W. (2026). Transient Numerical Study of Heat Extraction in Heat Sinks with Sinusoidal Fins Using Perforations. Energies, 19(13), 3079. https://doi.org/10.3390/en19133079
Vancouver
Toapanta-Ramos F, Ortega-Loza F, Erazo J, Diaz W. Transient Numerical Study of Heat Extraction in Heat Sinks with Sinusoidal Fins Using Perforations. Energies. 2026;19(13):3079. doi:10.3390/en19133079
BibTeX
@article{ToapantaRamos2026,
author = {Toapanta-Ramos, Fernando and Ortega-Loza, Fernando and Erazo, José and Diaz, William},
title = {Transient Numerical Study of Heat Extraction in Heat Sinks with Sinusoidal Fins Using Perforations},
journal = {Energies},
year = {2026},
volume = {19},
number = {13},
pages = {3079},
doi = {10.3390/en19133079}
}
EUVIMED