EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fabrication of Composite Polyimide Separator for Lithium Ion Battery Thermal Safety Improvement

Peng Sun, Yong Qiu, Yan Wang, Zhiyuan Gao, Wenpo Yang, Lingbo Fang, Kexin Fan, Xiao Ke, Jiakun Liu, Bin Sun, Xuewen Geng

Energies · 17.06.2026 · 19 (12) · 2867

DOI: 10.3390/en19122867 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 17.06.2026. Verfasst von Peng Sun und 10 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The poor thermal stability and inferior ion transport performance of polyolefin separators have been the bottlenecks restricting the development of lithium ion battery (LIB)-based high-power energy storage systems. Thus, the preparation of advanced separators is essential as the alternative of traditional polyolefin for reliable LIB-based large-scale grid energy storage. In this study, a composite polyimide-based separator doped with a lithium-conducting inorganic was prepared by electrospinning combined with in situ thermal imidization as the matrix. The effects of the inorganic and thermal treatment conditions on the structure and performance of the separator were systematically investigated. The results show that the optimized composite separator exhibits excellent comprehensive performance: (1) its thermal stability is significantly better than that of commercial polyolefin separators, with no obvious size shrinkage at high temperatures; (2) the porosity and electrolyte wettability are greatly improved, effectively promoting the uniform transport and desolvation process of lithium ions, and the ion transport performance is significantly enhanced; and (3) the mechanical properties meet the requirements for commercial batteries. In half-cell tests, the composite separator achieved excellent rate performance and cycling stability. Particularly, overcharge tests for the assembled pouch cells with Ah-level were performed, where the low overcharge temperature verified the better thermal stability of the composite separator than that of batteries assembled with traditional commercial separators. This study provides new ideas and technical support for the design and industrial application of high-safety and long-life energy storage battery separators.

Zitieren

APA

Sun, P., Qiu, Y., Wang, Y., Gao, Z., Yang, W., Fang, L., Fan, K., Ke, X., Liu, J., Sun, B., & Geng, X. (2026). Fabrication of Composite Polyimide Separator for Lithium Ion Battery Thermal Safety Improvement. Energies, 19(12), 2867. https://doi.org/10.3390/en19122867

Vancouver

Sun P, Qiu Y, Wang Y, Gao Z, Yang W, Fang L, et al. Fabrication of Composite Polyimide Separator for Lithium Ion Battery Thermal Safety Improvement. Energies. 2026;19(12):2867. doi:10.3390/en19122867

BibTeX
@article{Sun2026,
  author = {Sun, Peng and Qiu, Yong and Wang, Yan and Gao, Zhiyuan and Yang, Wenpo and Fang, Lingbo and Fan, Kexin and Ke, Xiao and Liu, Jiakun and Sun, Bin and Geng, Xuewen},
  title = {Fabrication of Composite Polyimide Separator for Lithium Ion Battery Thermal Safety Improvement},
  journal = {Energies},
  year = {2026},
  volume = {19},
  number = {12},
  pages = {2867},
  doi = {10.3390/en19122867}
}
Kostenlos starten →