Lattice-Based Volumetric Heat Sinks for Forced-Convection Cooling of Power Electronics: A Critical Review
Energies · 14.06.2026 · 19 (12) · 2834
DOI: 10.3390/en19122834 ↗Kurz gefasst
Fachartikel in der Zeitschrift Energies, online erschienen am 14.06.2026. Verfasst von Ebelechukwu Okeke und 2 weiteren Autor:innen. Die Arbeit nennt 146 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Lattice-based heat sinks have attracted increasing attention as volumetric thermal management architectures for forced-convection cooling of high-power electronic systems. In contrast to conventional plate-fin, pin-fin, and straight-channel configurations, lattice geometries promote three-dimensional flow–solid interaction through interconnected ligament networks that modify boundary-layer development, wake formation, and internal heat-spreading pathways. This review synthesizes recent experimental and numerical studies to examine the thermo-fluid mechanisms governing lattice performance, with emphasis on the coupled influence of porosity, ligament dimensions, topology, orientation, and channel confinement on heat-transfer enhancement and hydraulic resistance. The analysis indicates that while lattice structures can increase average Nusselt number and improve temperature uniformity, these gains are intrinsically linked to pressure-drop penalties associated with flow tortuosity and form drag, resulting in regime-dependent thermal-hydraulic behavior. Apparent discrepancies reported across the literature are frequently attributable to differences in geometric definition, Reynolds-number normalization, and boundary-condition specification rather than to inconsistencies in physical mechanisms. By consolidating geometric scaling, performance metrics, manufacturing considerations, and system-level constraints, this review clarifies the conditions under which lattice heat sinks may provide net benefit relative to conventional cooling technologies and identifies key research directions required to support application-relevant design and evaluation.
Zitieren
APA
Okeke, E., Khatamifar, M., & Lin, W. (2026). Lattice-Based Volumetric Heat Sinks for Forced-Convection Cooling of Power Electronics: A Critical Review. Energies, 19(12), 2834. https://doi.org/10.3390/en19122834
Vancouver
Okeke E, Khatamifar M, Lin W. Lattice-Based Volumetric Heat Sinks for Forced-Convection Cooling of Power Electronics: A Critical Review. Energies. 2026;19(12):2834. doi:10.3390/en19122834
BibTeX
@article{Okeke2026,
author = {Okeke, Ebelechukwu and Khatamifar, Mehdi and Lin, Wenxian},
title = {Lattice-Based Volumetric Heat Sinks for Forced-Convection Cooling of Power Electronics: A Critical Review},
journal = {Energies},
year = {2026},
volume = {19},
number = {12},
pages = {2834},
doi = {10.3390/en19122834}
}
EUVIMED