EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Hybrid Air-Conditioning System with Transparent Thermal Insulation and Phase-Change Material: Experimental Heat Flux Measurements and CFD Analysis

Agustín Torres Rodríguez, David Morillón Gálvez, Rodolfo Silva Casarín

Energies · 17.05.2026 · 19 (10) · 2407

DOI: 10.3390/en19102407 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 17.05.2026. Verfasst von Agustín Torres Rodríguez und 2 weiteren Autor:innen. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Buildings account for a substantial proportion of global energy consumption and greenhouse-gas emissions, largely due to the widespread use of conventional heating, ventilation, and air-conditioning (HVAC) systems. Hybrid systems that integrate passive and active technologies have emerged as a promising strategy for reducing energy demand while maintaining adequate indoor environmental conditions. This study evaluates the thermal and airflow performance of a hybrid air-conditioning system (HACS) that combines transparent thermal insulation (TTI) filled with R-410A refrigerant and a pig-fat-based organic phase-change material (PCM). Experimental measurements of heat flux, temperature, airflow velocity, and CO2 concentration were conducted in a controlled prototype system. In parallel, computational simulations were performed using computational fluid dynamics (CFD) and multizone airflow modeling. The hybrid system incorporates a TTI container acting as a solar absorber and a galvanized-steel PCM container filled with 10 kg of pig fat used as latent heat storage. Heat-flux measurements were obtained using an HFS-5 sensor connected to a data acquisition system, while airflow velocity and temperature were monitored with analog data loggers. Indoor CO2 concentrations were recorded using a dedicated CO2 meter and simulated using CONTAMW software version 3.4.0.8. The experimental results show that the TTI and PCM containers reached average heat-flux values of 77.04 W/m2 and 55.31 W/m2, respectively. Airflow within the system is induced by buoyancy forces arising from temperature gradients generated by heat transfer processes at the surfaces of the TTI and PCM, resulting in a mixed air stream with an average temperature of 37.54 °C during winter operation. Recorded CO2 concentrations remained between 290 and 413 ppm, indicating high indoor air quality levels. The overall experimental campaign spanned 6 years and 3 months. CFD simulations confirmed the airflow patterns and heat-transfer behavior observed experimentally. The findings demonstrate that hybrid air-conditioning systems combining refrigerant-filled transparent insulation with bio-based phase-change materials can effectively enhance passive thermal performance while maintaining acceptable indoor air quality. The integration of photovoltaic-powered ventilation systems could further the operational autonomy and overall energy efficiency of such hybrid systems.

Zitieren

APA

Rodríguez, A. T., Gálvez, D. M., & Casarín, R. S. (2026). Hybrid Air-Conditioning System with Transparent Thermal Insulation and Phase-Change Material: Experimental Heat Flux Measurements and CFD Analysis. Energies, 19(10), 2407. https://doi.org/10.3390/en19102407

Vancouver

Rodríguez AT, Gálvez DM, Casarín RS. Hybrid Air-Conditioning System with Transparent Thermal Insulation and Phase-Change Material: Experimental Heat Flux Measurements and CFD Analysis. Energies. 2026;19(10):2407. doi:10.3390/en19102407

BibTeX
@article{Rodrguez2026,
  author = {Rodríguez, Agustín Torres and Gálvez, David Morillón and Casarín, Rodolfo Silva},
  title = {Hybrid Air-Conditioning System with Transparent Thermal Insulation and Phase-Change Material: Experimental Heat Flux Measurements and CFD Analysis},
  journal = {Energies},
  year = {2026},
  volume = {19},
  number = {10},
  pages = {2407},
  doi = {10.3390/en19102407}
}
Kostenlos starten →