EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Synergistic Design and Optimization of a Solar-Harvesting Energy Storage System with High-Efficiency Resonant Inductive Power Transfer

Ahmed Badawi, Wasel Ghanem, Hasan Daban, Mohammed Alkhowar, I. M. Elzein, Claude Ziad El-Bayeh, Tahani Alrabadi

Energies · 07.05.2026 · 19 (10) · 2265

DOI: 10.3390/en19102265 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 07.05.2026. Verfasst von Ahmed Badawi und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 79 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Integrating renewable energy harvesting with wireless power transfer (WPT) introduces complex multi-physics coupling challenges, primarily regarding thermal detuning and conversion inefficiencies within compact enclosures. This study proposes an optimized architecture and analytical framework for a Solar-Driven Portable Energy Storage System (SPESS) that bridges the gap between solar harvesting and autonomous wireless delivery. The system integrates a high-efficiency 5 V monocrystalline photovoltaic (PV) array with a 10,000 mAh lithium-ion core, regulated by an adaptive Maximum Power Point Tracking (MPPT) algorithm. We formalize the synergistic coupling between thermal and electrical subsystems, demonstrating how iterative thermal–electric co-design—utilizing CFD-modeled ventilation and anisotropic graphite spreaders—effectively suppresses capacitive drift in the resonant network. Unlike fixed-frequency chargers, this design employs Phase-Locked Loop (PLL) frequency stabilization to maintain a “High-Q” state, achieving wireless transmission efficiencies exceeding 85% and a measured 12.3% restorative gain in the WPT stage compared to a thermally detuned baseline. Robustness analysis confirms spatial resilience up to 10 mm of lateral misalignment and thermal stabilization at 48 °C under continuous 15 W load, contributing to a calculated 18% extension in battery cycle life via suppressed chemical degradation. Experimental validation across varying irradiance levels (100–1200 W/m2) demonstrates a full recovery cycle of 23.6 cumulative solar hours at Standard Test Conditions (STC). This research provides a scalable, theoretically grounded framework for resilient, self-sustaining energy modules for disaster relief, remote education, and mobile health applications.

Zitieren

APA

Badawi, A., Ghanem, W., Daban, H., Alkhowar, M., Elzein, I. M., El-Bayeh, C. Z., & Alrabadi, T. (2026). Synergistic Design and Optimization of a Solar-Harvesting Energy Storage System with High-Efficiency Resonant Inductive Power Transfer. Energies, 19(10), 2265. https://doi.org/10.3390/en19102265

Vancouver

Badawi A, Ghanem W, Daban H, Alkhowar M, Elzein IM, El-Bayeh CZ, et al. Synergistic Design and Optimization of a Solar-Harvesting Energy Storage System with High-Efficiency Resonant Inductive Power Transfer. Energies. 2026;19(10):2265. doi:10.3390/en19102265

BibTeX
@article{Badawi2026,
  author = {Badawi, Ahmed and Ghanem, Wasel and Daban, Hasan and Alkhowar, Mohammed and Elzein, I. M. and El-Bayeh, Claude Ziad and Alrabadi, Tahani},
  title = {Synergistic Design and Optimization of a Solar-Harvesting Energy Storage System with High-Efficiency Resonant Inductive Power Transfer},
  journal = {Energies},
  year = {2026},
  volume = {19},
  number = {10},
  pages = {2265},
  doi = {10.3390/en19102265}
}
Kostenlos starten →