EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Benchmarking 0D, 1D, and 2D Analytical Thermal Models for Cylindrical Inductors in Power Electronic Systems

Francesco Montana, Daniele Scirè

Energies · 23.04.2026 · 19 (9) · 2033

DOI: 10.3390/en19092033 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 23.04.2026. Verfasst von Francesco Montana und 1 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Department of Engineering, University of Palermo.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Inductors are critical components in power electronic systems, yet their thermal behavior is often approximated using simplified lumped models that neglect internal gradients and transient spatial effects. This paper presents a benchmarking study of analytical thermal modeling approaches for cylindrical inductors, including 0D lumped, 1D radial, and 2D radial–axial transient formulations. Starting from the general heat conduction equation in cylindrical coordinates, closed-form or semi-analytical solutions are discussed under uniform internal heat generation and convective boundary conditions. The proposed framework provides a benchmark-oriented analytical reference for selecting the appropriate thermal model complexity in reliability-oriented design of inductive components in power electronic systems. The models are applied to a representative two-layer cylindrical inductor composed of a ferrite core and a copper winding, under identical loss and cooling assumptions, considering two axial lengths in order to assess geometric influence. Steady-state temperature levels, transient responses, modal time constants, and axial gradient indicators are extracted to quantify the differences among modeling levels. The results show that the dominant thermal behavior is governed by a single slow mode with a time constant on the order of one hour. The spatially averaged temperature predicted by the 0D model deviates by less than 2.5% from the 2D solution in steady-state conditions, with the 1D model providing accurate predictions when axial gradients remain weak.

Förderung

  • Department of Engineering, University of Palermo

Zitieren

APA

Montana, F., & Scirè, D. (2026). Benchmarking 0D, 1D, and 2D Analytical Thermal Models for Cylindrical Inductors in Power Electronic Systems. Energies, 19(9), 2033. https://doi.org/10.3390/en19092033

Vancouver

Montana F, Scirè D. Benchmarking 0D, 1D, and 2D Analytical Thermal Models for Cylindrical Inductors in Power Electronic Systems. Energies. 2026;19(9):2033. doi:10.3390/en19092033

BibTeX
@article{Montana2026,
  author = {Montana, Francesco and Scirè, Daniele},
  title = {Benchmarking 0D, 1D, and 2D Analytical Thermal Models for Cylindrical Inductors in Power Electronic Systems},
  journal = {Energies},
  year = {2026},
  volume = {19},
  number = {9},
  pages = {2033},
  doi = {10.3390/en19092033}
}
Kostenlos starten →