EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Influence of the TiO2 Compact Layer on the Performance of Carbon-Based Ambient-Synthesized CH3NH3PbI3 Solar Cells

Cheikh Zakaria Eldjilali, Pei-Ling Low, Gregory Soon How Thien, Yew-Keong Sin, Boon Kar Yap, Kar Ban Tan, Kah-Yoong Chan

Energies · 17.04.2026 · 19 (8) · 1935

DOI: 10.3390/en19081935 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 17.04.2026. Verfasst von Cheikh Zakaria Eldjilali und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 86 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Higher Education (MOHE), Malaysia.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Since their discovery in 2009, perovskite solar cells (PSCs) have demonstrated rapid progress. Ambient-processed, carbon-based PSCs utilizing a pre-heating step offer a cost-effective fabrication route. Nevertheless, the role of the compact titanium dioxide (TiO2-c) layer in ambient conditions has remained under-explored and inconsistently reported in the literature. This study then investigated the impact of TiO2-c layer thickness, ranging from 70 nm to 155 nm, on the performance of PSCs fabricated entirely in ambient air with high relative humidity (RH > 70%). The layers were deposited via the sol-gel spin-coating method. Experimental results then revealed that the thinnest layer (70 nm) yielded the lowest average power conversion efficiency (PCE) of 2.05% due to diminished Jsc and Voc values. The optimized TiO2-c thickness was also identified at 95 nm, achieving an average PCE of 2.95% and a peak efficiency of 4.5%. Structural analysis via XRD confirmed the presence of both anatase and brookite phases. Notably, increasing the thickness from 70 nm to 155 nm resulted in a slight reduction in the anatase peak and a corresponding increase in the brookite peak. The superior performance at 95 nm could be attributed to a balanced crystal intensity between these two phases. Furthermore, TiO2-c thickness was found to correlate with larger aggregate formation, better uniform shape grains, and reduced surface roughness, significantly influencing the morphology of the subsequent mesoporous TiO2-m layer. These findings then provided critical insights into how thickness variation in the TiO2-c layer could influence the performance of ambient-processed carbon-based PSCs.

Förderung

  • Ministry of Higher Education (MOHE), Malaysia

Zitieren

APA

Eldjilali, C. Z., Low, P., Thien, G. S. H., Sin, Y., Yap, B. K., Tan, K. B., & Chan, K. (2026). The Influence of the TiO2 Compact Layer on the Performance of Carbon-Based Ambient-Synthesized CH3NH3PbI3 Solar Cells. Energies, 19(8), 1935. https://doi.org/10.3390/en19081935

Vancouver

Eldjilali CZ, Low P, Thien GSH, Sin Y, Yap BK, Tan KB, et al. The Influence of the TiO2 Compact Layer on the Performance of Carbon-Based Ambient-Synthesized CH3NH3PbI3 Solar Cells. Energies. 2026;19(8):1935. doi:10.3390/en19081935

BibTeX
@article{Eldjilali2026,
  author = {Eldjilali, Cheikh Zakaria and Low, Pei-Ling and Thien, Gregory Soon How and Sin, Yew-Keong and Yap, Boon Kar and Tan, Kar Ban and Chan, Kah-Yoong},
  title = {The Influence of the TiO2 Compact Layer on the Performance of Carbon-Based Ambient-Synthesized CH3NH3PbI3 Solar Cells},
  journal = {Energies},
  year = {2026},
  volume = {19},
  number = {8},
  pages = {1935},
  doi = {10.3390/en19081935}
}
Kostenlos starten →