EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Is Super-Duplex Stainless Steel Suitable as Metal Support for Solid Oxide Cells?

Buse Bilbey, Axel Savikko, M. Unsal Unver, Murat Murutoglu, Aligul Buyukaksoy, Huseyin Yilmaz, L. Colakerol Arslan, Muhammad Imran Asghar

Energies · 09.04.2026 · 19 (8) · 1856

DOI: 10.3390/en19081856 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 09.04.2026. Verfasst von Buse Bilbey und 7 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Research Council of Finland, Business Finland.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, commercial Ospray-2507 super-duplex stainless steel powder was investigated for the first time as a potential metal support material for solid oxide cells. Initially, metal supports were fabricated and processed in air using various sintering profiles, followed by comprehensive mechanical, structural and electrochemical characterization. The optimal sintering condition was identified as 900 °C for 5 h. Subsequently, sintering under a H2 atmosphere was explored, and its effects on the microstructural and functional properties of the metal supports were systematically to assessed to evaluate the influence of the sintering atmosphere on material performance. Although X-ray diffraction patterns showed no phase changes between the two sintering atmospheres, notable improvements were observed in mechanical, electrochemical, and microstructural properties under H2 sintering. XPS spectra reveal that both air- and hydrogen-treated surfaces remain rich in chromium (Cr) and Manganese (Mn), which together dominate the surface and consequently attenuate the signal from the underlying iron. The thickness of the Cr- and Mn-based oxide layer decreases when sintering MS in H2 atmosphere. Specifically, mechanical strength, as measured by three-point bending tests, increased by a factor of 12.5, and hardness rose from 500.3 to 523.5 HV. Furthermore, electrical conductivity also improved significantly, exhibiting an approximately 2.3–2.4 fold increase under H2-sintered conditions.

Förderung

  • Research Council of Finland
  • Business Finland

Zitieren

APA

Bilbey, B., Savikko, A., Unver, M. U., Murutoglu, M., Buyukaksoy, A., Yilmaz, H., Arslan, L. C., & Asghar, M. I. (2026). Is Super-Duplex Stainless Steel Suitable as Metal Support for Solid Oxide Cells?. Energies, 19(8), 1856. https://doi.org/10.3390/en19081856

Vancouver

Bilbey B, Savikko A, Unver MU, Murutoglu M, Buyukaksoy A, Yilmaz H, et al. Is Super-Duplex Stainless Steel Suitable as Metal Support for Solid Oxide Cells?. Energies. 2026;19(8):1856. doi:10.3390/en19081856

BibTeX
@article{Bilbey2026,
  author = {Bilbey, Buse and Savikko, Axel and Unver, M. Unsal and Murutoglu, Murat and Buyukaksoy, Aligul and Yilmaz, Huseyin and Arslan, L. Colakerol and Asghar, Muhammad Imran},
  title = {Is Super-Duplex Stainless Steel Suitable as Metal Support for Solid Oxide Cells?},
  journal = {Energies},
  year = {2026},
  volume = {19},
  number = {8},
  pages = {1856},
  doi = {10.3390/en19081856}
}
Kostenlos starten →