EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on the Injection Modes and Displacement Characteristics of Chemical Compound Flooding in Heavy Oil Reservoirs After Multiple Cycles of Huff-and-Puff

Li Zhang, Lei Tao, Guanli Xu, Jiajia Bai

Energies · 01.04.2026 · 19 (7) · 1728

DOI: 10.3390/en19071728 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 01.04.2026. Verfasst von Li Zhang und 3 weiteren Autor:innen. Die Arbeit nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National major science and technology project, SINOPEC science and technology project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The chemical agent injection modes and displacement characteristics of chemical compound flooding, consisting of a plugging agent, an oil displacement agent, and a viscosity reducer, were investigated by laboratory experiments for target heavy oil reservoirs after multiple cycles of huff-and-puff. The performances of the oil displacement agent, viscosity reducer and plugging agent were evaluated, and the formulation and concentration were optimized. The oil displacement effects and displacement characteristics of different injection modes were studied by sand-filled two-pipe models. The experiment results showed that alternating injections of the oil displacement agent and viscosity reducer yielded better results than their mixed injection, and small segments alternating injections achieved the highest recovery. The larger the dosage of the oil displacement agent, the larger the maximum liquid production ratio between the high- and low-permeability layers, but with the smaller the liquid production reverse duration. The larger the dosage of the viscosity reducer, the greater the water cut decrease but the smaller the maximum liquid production ratio. For chemical compound flooding in the Zhong’er block in the Gudao oilfield, the recommended injection mode was 0.1 PV plugging agent + 2000 mg/L of oil displacement agent + 0.5% viscosity reducer, with small segments of the oil displacement agent being followed by a viscosity reducer at an injection slug ratio of 6:4. However, the injection mode depends on the prices of oil and the chemical agent. When prices fluctuate, the chemical agent concentration should be adjusted accordingly.

Förderung

  • National major science and technology project
  • SINOPEC science and technology project

Zitieren

APA

Zhang, L., Tao, L., Xu, G., & Bai, J. (2026). Study on the Injection Modes and Displacement Characteristics of Chemical Compound Flooding in Heavy Oil Reservoirs After Multiple Cycles of Huff-and-Puff. Energies, 19(7), 1728. https://doi.org/10.3390/en19071728

Vancouver

Zhang L, Tao L, Xu G, Bai J. Study on the Injection Modes and Displacement Characteristics of Chemical Compound Flooding in Heavy Oil Reservoirs After Multiple Cycles of Huff-and-Puff. Energies. 2026;19(7):1728. doi:10.3390/en19071728

BibTeX
@article{Zhang2026,
  author = {Zhang, Li and Tao, Lei and Xu, Guanli and Bai, Jiajia},
  title = {Study on the Injection Modes and Displacement Characteristics of Chemical Compound Flooding in Heavy Oil Reservoirs After Multiple Cycles of Huff-and-Puff},
  journal = {Energies},
  year = {2026},
  volume = {19},
  number = {7},
  pages = {1728},
  doi = {10.3390/en19071728}
}
Kostenlos starten →